• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Brake Upgrade

  • Thread starter Thread starter Old Skooler
  • Start date Start date May 21, 2013
  • 1
  • 2
Next
1 of 2 Next Last

Old Skooler

Founding Member
Feb 27, 2012
248
43
39
May 21, 2013
#1
  • May 21, 2013
  • #1
So here's another brake thread but I have a different type of question. Naturally I want to do a 5 lug cobra upgrade but that would also involve me buying new rims. I want the Chicanes true forged rims 3500. That said my plan I stokers the rims I have until after paint (2 winters from now).

That said I need to upgrade my brakes now so I was thinking new front calipers, 4 lug 31 spline rear disc conversion for the rear and 93 cobra master with proportioning valve. LMR has the rear disc conversion for 750. Has anyone done this if so how much did it improve. It sucks to spend the cash knowing its only short term, but it would suck more to smack up the car because I couldn't stop.

If people have tried this with minimal results I will hold off. Input needed!!
 

newskool

Active Member
Oct 17, 2006
251
37
48
Fayetteville, NC
May 21, 2013
#2
  • May 21, 2013
  • #2
If you plan on going 5 lug in the somewhat near future then don't bother with a major brake upgrade right now. Just go with some better pads/rotors to get by until your 5 lug swap.
 

elarm1

10 Year Member
Dec 17, 2010
1,428
652
154
N.Va
May 21, 2013
#3
  • May 21, 2013
  • #3
I would hold off until you do the five. Its so worth it!
 
Reactions: 90lxcoupe

Mintsick

10 Year Member
Jan 6, 2007
589
39
68
West Lafayette, IN
May 21, 2013
#4
  • May 21, 2013
  • #4
There is no way I'd waste my time with a 4 lug brake upgrade personally. There is even less of a chance that I would ever spend $3500 on a set of wheels for any vehicle, let alone a fox mustang that is barely worth $3500 with that set of wheels on the car!
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
May 21, 2013
#5
  • May 21, 2013
  • #5
I would/did ( not Chicanes )
 
Reactions: Illuminator and newskool

Old Skooler

Founding Member
Feb 27, 2012
248
43
39
May 21, 2013
#6
  • May 21, 2013
  • #6
Mintsick said:
There is no way I'd waste my time with a 4 lug brake upgrade personally. There is even less of a chance that I would ever spend $3500 on a set of wheels for any vehicle, let alone a fox mustang that is barely worth $3500 with that set of wheels on the car!
Click to expand...
Wel I guess that's open to opinion, for what I have into my car I probably could have bought a new GT cash. It's not about money it's about restoring my car and seeing my vision through. Lets face it unless your buying a limited edition Saleen or Cobra R none of us are in this hobby to turn a profit. It's a labor of love.

That said maybe ill swap out the original calipers and get some upgraded rotors and pads. I really don't want to spend the money only to go 5 lug.
 
Reactions: 90lxcoupe

Old Skooler

Founding Member
Feb 27, 2012
248
43
39
May 21, 2013
#7
  • May 21, 2013
  • #7
I had your car on my work computer as a screen saver until I got my car back. Nice and clean
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
May 21, 2013
#8
  • May 21, 2013
  • #8
Thanks, I get more compliments on the wheels than anything else.
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,498
8,751
234
S.I.NY
May 21, 2013
#9
  • May 21, 2013
  • #9
GroverDill said:
Thanks, I get more compliments on the wheels than anything else.
Click to expand...
those wheels are beautiful, razor sharp and too the point not over the edge they fit the car very very well
 

GroverDill

GoldMember
Founding Member
Aug 18, 1999
5,442
1,490
214
Demotte IN 46310
May 21, 2013
#10
  • May 21, 2013
  • #10
Thanks I thought the (fairly big) power would get the props and high fives... nope the wheels.
 

TOOLOW91

If you're the village idiot what's that make me?
20+ Year Stangneter
Nov 29, 1999
8,498
8,751
234
S.I.NY
May 21, 2013
#11
  • May 21, 2013
  • #11
GroverDill said:
Thanks I thought the (fairly big) power would get the props and high fives... nope the wheels.
Click to expand...
You car as a package just works bro! plus the reef blue is and fairly big is being modest lol !
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,359
209
114
Ohio
May 21, 2013
#12
  • May 21, 2013
  • #12
I would not waste my money on a 4 lug brake kit, save your coin for a 5 lug conversion.
 

02 281 GT

Agreed...My wife has great Boobs
15 Year Member
Feb 3, 2009
3,208
1,972
194
Cabot, AR
May 22, 2013
#13
  • May 22, 2013
  • #13
GroverDill said:
Thanks, I get more compliments on the wheels than anything else.
Click to expand...
"Where'd ya get those riiiiiims brah?"

Are you talking about compliments from the Mustang crowd, or just in general?

And to the OP, I say go for the wheels if that's what you want. It would be a relief to see them on something other than a terminator.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,282
17,975
224
Massachusetts
May 22, 2013
#14
  • May 22, 2013
  • #14
I've had a bunch of brake setups on my car. SVO brakes, 73mm fronts, SN95 GT brakes, rear disk, Cobra disk, etc. Needless to say i've done a bunch.


The only setup i've been really happy with was the 5-lug Cobra disk brake kit. The performance gain was incredible, but the 13" front brakes and 11.65" rear disks filled out the wheels nicely, which added a bonus for me. I spent $750 to do my conversion as well. Wish i saved all my money from the earlier swaps and just did the 5-lug cobra from the beginning.

Every other setup I wanted to beleive my braking performance had increased, but the only setup that really impressed me was the Cobra brakes
 

krazedstang

15 Year Member
Mar 23, 2009
670
278
104
Streamwood
May 22, 2013
#15
  • May 22, 2013
  • #15
Mustang5L5 said:
I've had a bunch of brake setups on my car. SVO brakes, 73mm fronts, SN95 GT brakes, rear disk, Cobra disk, etc. Needless to say i've done a bunch.


The only setup i've been really happy with was the 5-lug Cobra disk brake kit. The performance gain was incredible, but the 13" front brakes and 11.65" rear disks filled out the wheels nicely, which added a bonus for me. I spent $750 to do my conversion as well. Wish i saved all my money from the earlier swaps and just did the 5-lug cobra from the beginning.

Every other setup I wanted to beleive my braking performance had increased, but the only setup that really impressed me was the Cobra brakes
Click to expand...

Keeping this in mind for when I finally do my 5-lug disk brakes
 

LarsD

Founding Member
Jul 2, 2002
2,680
119
123
Texas
May 22, 2013
#16
  • May 22, 2013
  • #16
Yeah wait until you can do the Cobra brakes. I went front 4 lug to 5 lug GT brakes and they were a marginal improvement. When I went with the Cobra's it was incredible. My 91 stops as good as my 12', and it still has the puny drums on the rear as well.
 

Bryan83taco

Active Member
Feb 4, 2003
554
40
39
SF Bay
May 22, 2013
#17
  • May 22, 2013
  • #17
Old Skooler said:
That said maybe ill swap out the original calipers and get some upgraded rotors and pads. I really don't want to spend the money only to go 5 lug.
Click to expand...

If your looking in the right places you can get your whole 5 lug/rear disc setup for only a little bit more than the cost of upgraded rotors and pads. Look for a wrecked 94-95 V6 for the front setup and a 94-98 V6 for the rear disc stuff. Found my stuff for CHEAP. Then for another cheap upgrade to those, find some dual piston PBR front brakes off 99-04 mustangs (not entirely sure of those years, do some research). All you need to do is grind a bit off the spindle to make them work.

Don't waste your money if you plan on upgrading in the future. Do it right the first time, it saves you TIME and MONEY! Ask me how I know.
 

Shakerhood

20+ Year Stangneter
Oct 28, 2004
3,359
209
114
Ohio
May 23, 2013
#18
  • May 23, 2013
  • #18
Cobra Brakes on mine too, stops incredible
 

Old Skooler

Founding Member
Feb 27, 2012
248
43
39
May 23, 2013
#19
  • May 23, 2013
  • #19
So who has bought the kit from LMR and for those who didn't where did you buy the new brake lines or did you modify the existing ones?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,282
17,975
224
Massachusetts
May 23, 2013
#20
  • May 23, 2013
  • #20
Old Skooler said:
So who has bought the kit from LMR and for those who didn't where did you buy the new brake lines or did you modify the existing ones?
Click to expand...

Modified. It was easy

94-95 rear SN95 soft lines (that mount to the axle)
Weatherhead 7818 from NAPA
Slight rebending of the original drum brake line


Less than $30 in parts or so.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
545
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
S
Fox Another try for the European guy to get his first Fox
  • Schargedfox
  • Aug 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
267
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 4, 2026
DadLife0724
Progress Thread 91GTstroked 90 7 up convertible build
  • 91GTstroked
  • Apr 18, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
369
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 22, 2026
91GTstroked
Rear Disc and Rims Offsets
  • TripleYellow
  • Nov 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 9, 2026
TripleYellow
C
Fox Need help identifying brake setup
  • Cypher02xd
  • Apr 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
163
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 27, 2026
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?