Built 3650

slow5.0gt

New Member

Aug 12, 2006

138

0

0

Mar 22, 2008

#1

• Mar 22, 2008

• #1

Anyone know of a place that sells straight cut gears, hardened main shaft for the 3650? Or anything else that could have my stang withstand 500 hp more or less?

I was looking at the g-force website which doesnt have parts for the 3650, but im looking to get a kit possibly that i can put together to have a much stronger tranny when i drop in the supercharger etc.
The cloeset one I found was at promotions website but im looking to possibly get the parts and install it with a friend.

 

C

Chris00GT

Founding Member

Jan 28, 2001

275

0

16

York Springs, PA

Mar 22, 2008

#2

• Mar 22, 2008

• #2

I'd look into the TKO-600. It will take the power your looking at, and is a nice shifting trany. I'm pulling the AOD in my 91LX and installing the TKO-600 in the next week or two.

 

ADRENLN

Active Member

Apr 16, 2003

2,342

3

49

NJ

Mar 22, 2008

#3

• Mar 22, 2008

• #3

http://www.promotionpowertrain.com/1231590.html

im thinking of going that way if they can make one to hold 500 plus rwhp


if not go tko 500-600

 

slow5.0gt

New Member

Aug 12, 2006

138

0

0

Mar 22, 2008

#4

• Mar 22, 2008

• #4

Bummer I was hoping that I can get some pretty good internals for the 3650 rather then going for entire different tranny

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,158

17,852

224

Massachusetts

Mar 22, 2008

#5

• Mar 22, 2008

• #5

I don't think anyone makes stronger internals for the 3650

 

ADRENLN

Active Member

Apr 16, 2003

2,342

3

49

NJ

Mar 22, 2008

#6

• Mar 22, 2008

• #6

did you guys check the link i posted? it says they recondition the 3650 for up to 750 hp!!!!! i think i will give one of those a try so i dont have to change any other parts and clutch stuff when i do it.

what do you think of them? might be good for you too. i dont know what all they do to the tranny but im sure you can email them in the contact us section to find out.

 

ADRENLN

Active Member

Apr 16, 2003

2,342

3

49

NJ

Mar 22, 2008

#7

• Mar 22, 2008

• #7

3rd block down, right side

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,158

17,852

224

Massachusetts

Mar 22, 2008

#8

• Mar 22, 2008

• #8

I only see that it comes with better shift forks and the Ford TSB parts to cure the 2nd gear clunk.

I don't see how that would bump the rating fro 360 ft-lbs of torque to over 750HP. I'd call em up and ask em what else is done to the trans.

 

ADRENLN

Active Member

Apr 16, 2003

2,342

3

49

NJ

Mar 22, 2008

#9

• Mar 22, 2008

• #9

i know they dont list anything that would do that. they have to do other things to claim that type of number. i will def ask before i buy, but i figured somone else might get to it before i do. im not working on my trans yet.

 

B

blubullett

Member

Jun 22, 2006

535

6

18

Modesto, CA

Mar 22, 2008

#10

• Mar 22, 2008

• #10

If you search e bay there is some company that sells them all polished anb blueprinted.

 

slow5.0gt

New Member

Aug 12, 2006

138

0

0

Mar 22, 2008

#11

• Mar 22, 2008

• #11

Ah i didnt see that...