Built 3650

[slow5.0gt]

Anyone know of a place that sells straight cut gears, hardened main shaft for the 3650? Or anything else that could have my stang withstand 500 hp more or less?

I was looking at the g-force website which doesnt have parts for the 3650, but im looking to get a kit possibly that i can put together to have a much stronger tranny when i drop in the supercharger etc.
The cloeset one I found was at promotions website but im looking to possibly get the parts and install it with a friend.

 

[Chris00GT]

I'd look into the TKO-600. It will take the power your looking at, and is a nice shifting trany. I'm pulling the AOD in my 91LX and installing the TKO-600 in the next week or two.

 

[ADRENLN]

http://www.promotionpowertrain.com/1231590.html

im thinking of going that way if they can make one to hold 500 plus rwhp


if not go tko 500-600

 

[slow5.0gt]

Bummer I was hoping that I can get some pretty good internals for the 3650 rather then going for entire different tranny

 

[Mustang5L5]

I don't think anyone makes stronger internals for the 3650

 

[ADRENLN]

did you guys check the link i posted? it says they recondition the 3650 for up to 750 hp!!!!! i think i will give one of those a try so i dont have to change any other parts and clutch stuff when i do it.

what do you think of them? might be good for you too. i dont know what all they do to the tranny but im sure you can email them in the contact us section to find out.

 

[ADRENLN]

3rd block down, right side

 

[Mustang5L5]

I only see that it comes with better shift forks and the Ford TSB parts to cure the 2nd gear clunk.

I don't see how that would bump the rating fro 360 ft-lbs of torque to over 750HP. I'd call em up and ask em what else is done to the trans.

 

[ADRENLN]

i know they dont list anything that would do that. they have to do other things to claim that type of number. i will def ask before i buy, but i figured somone else might get to it before i do. im not working on my trans yet.

 

[blubullett]

If you search e bay there is some company that sells them all polished anb blueprinted.

 

[slow5.0gt]

Ah i didnt see that...