I am planning on getting the Bullit brake kit & SS brake lines I was just wondering if anyone else had this kit and opinions on the increase in stopping power.
Bullit Brake Kit
- Thread starter stangJunkie04
- Start date
your not going to see a HUGE increase in stopping power! You basically already have the same calipers on your car now. You would be upsizing rotors and adding prolonged stopping power to your car, but as far as a 1 time stop i'd have to say the improvement would not be huge!
Unless you do alot of heavy spirited driving or track events then this is mostly a cosmetic upgrade for 99-04 gt's since your stock brakes are fairly good. Its us 94-98 gt's that really see a HUGE difference from the swap because our stock brakes were junk.
Unless you do alot of heavy spirited driving or track events then this is mostly a cosmetic upgrade for 99-04 gt's since your stock brakes are fairly good. Its us 94-98 gt's that really see a HUGE difference from the swap because our stock brakes were junk.
I just installed mach 1 brakes and MM stainless hoses last week and there is definitely a difference but it is not a huge difference. I would only suggest doing it when your stock brakes are pretty much gone. I bought the rotors and calipers from www.buyfordracing.com for $259, I ordered the mach 1 kit subtracting their brake lines and bought stainless brake hoses from MM. All finished it cost me less than 400$
yeah i just wanted to improve my brakes stopping power so if this is not a significant brake increase then its not worth spending 450.00 on. Maybe I will just upgrade my pads and brake line with stainless steel.
Similar threads
