• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Buying a 02 motor to put into a 96 could use some help..

  • Thread starter Thread starter Makalani_96GT
  • Start date Start date Mar 5, 2004
M

Makalani_96GT

New Member
Jun 10, 2003
159
0
0
SoCal
Mar 5, 2004
#1
  • Mar 5, 2004
  • #1
Ok I was about to buy a PI kit when I on a hunch called my not so local junkyard and he has a 2002 for about the same price so I'm going to go get it tomorrow....
Here's my forseealbe problems:
1. Returnless fuel system -Can I just put my fuel lines from the 96 on the intake and use the whole fuel system I have now?
2. Coil-on-plug -The new motor will not have a place for my coil packs so I will have to fab a bracket for them correct?
3. Transmission -Will my T-45 bellhousing bolt up to the 02 motor.
4. EEC-V -As you can tell I want to use my current engine harness so will that work?
5. Prochamber -I just put a Prochamber in do you think I will have any fitment issues with this motor?

That about all I can think of right now am I forgetting anything? Please help guys and girls! Thanks!!!!!!!!!!!!!
 
M

Makalani_96GT

New Member
Jun 10, 2003
159
0
0
SoCal
Mar 5, 2004
#2
  • Mar 5, 2004
  • #2
nobody out there has done this swap before?
 

stangtrooper97

Founding Member
Aug 30, 2002
322
1
0
King of Prussia
Mar 5, 2004
#3
  • Mar 5, 2004
  • #3
Makalani_96GT said:
:
1. Returnless fuel system -Can I just put my fuel lines from the 96 on the intake and use the whole fuel system I have now?
2. Coil-on-plug -The new motor will not have a place for my coil packs so I will have to fab a bracket for them correct?
3. Transmission -Will my T-45 bellhousing bolt up to the 02 motor.
4. EEC-V -As you can tell I want to use my current engine harness so will that work?
5. Prochamber -I just put a Prochamber in do you think I will have any fitment issues with this motor?
Click to expand...

1) Reuse your current fuel rails. They will bolt up fine to the new engine.
2) Reuse the coil packs. They should bolt right up also.
3) As long as it has the correct bolt flywheel, this should bolt up fine as well.
4)Your entire harness will work except for the second temp sensor. You just have to tap the intake like on a headswap and everythine else is fine.
5) I'm not 100% sure, but I would think it will bolt up fine. It will probably be a trial and error type thing here.

Good luck. It should be easier than the headswap. Let us know how it turns out.
Pete
 
M

Makalani_96GT

New Member
Jun 10, 2003
159
0
0
SoCal
Mar 6, 2004
#4
  • Mar 6, 2004
  • #4
thanks I will let you know how it turns out.
 
You must log in or register to reply here.

Similar threads

I
Engine Help requested in identifying how to resolve engine light issue
  • Ianslaney
  • Oct 4, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
105
SN95 4.6L Mustang Tech Oct 4, 2026
Bullitt347
Electrical Lincoln Mark VIII Replacement Fan Motor
  • AeroCoupe
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
116
Fox 5.0 Mustang Tech Sep 26, 2026
AeroCoupe
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
783
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
491
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
E
Chasing Vacuum leak 99 GT
  • EBNS_2005
  • May 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
231
1996 - 2004 SN95 Mustang -General/Talk- May 3, 2026
X-cam34
X
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?