• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

By Passing Water hoses going through Throttle Body

  • Thread starter Thread starter jpchefz
  • Start date Start date Oct 30, 2010

jpchefz

New Member
Dec 27, 2003
10
1
1
Fort Wayne, IN
Oct 30, 2010
#1
  • Oct 30, 2010
  • #1
I have an 88 GT, it is basically stock. There is a water hose running through the throttle body. The hose connects in the front of the TB and exits the back of the TB. Not sure why water runs through there? anyway, can I just run a straight hose elimiating the water going through the TB? Does it need the water running through it? If I can bypass this, is it cool to just put some vacuum covers over the ends where the hoses attach to the TB?

Thanks!
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,255
17,939
224
Massachusetts
Oct 30, 2010
#2
  • Oct 30, 2010
  • #2
Its there to cool off the egr spacer which gets hot from passing hot exhaust gases through it.


Leave it alone...its there for a reason
 

robo

Member
Jan 2, 2004
132
0
16
cleveland ohio
Oct 30, 2010
#3
  • Oct 30, 2010
  • #3
do not remove the hose. like already posted it is meant to cool the heat generated by the egr.

they call it coolant for a reason. back in the day you would see guys doing that and i'd always ask them why they stopped there? if you can run an engine cooler by cutting off the flow of coolant why not eliminate it from the engine, altogether?
 

MFE92

10 Year Member
Aug 25, 2010
1,094
373
124
Phoenix
Oct 30, 2010
#4
  • Oct 30, 2010
  • #4
I say move 'em if you want to, because nobody in all my years following these things has ever provided an explanation for why the EGR "cooling" function didn't exist on 5.0 Cobra intakes, which mount their EGR's in exactly the same place.
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Oct 30, 2010
#5
  • Oct 30, 2010
  • #5
You can plug off the port at the back of the intake with a pipe plug and you can cap off the port on the heater tube with a piece of hose with a bolt stuck in it. I hate to agree with MFE92, but I do in this case. The Cobra manifold doesn't have this provision and I didn't replace the hoses when I got rid of mine. I've been running for a couple of years without them with no ill effects. There's nothing to gain by eliminating the cooling hoses, but nothing hurt by doing so either in my experience.
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
Oct 30, 2010
#6
  • Oct 30, 2010
  • #6
My Explorer intake didn't have that port in the back of the lower intake,so,I just deleted it altogether.It's been 5 years now and never had an issue with it. Sure,it was put there for a reason,but so was the air silencer for the air intake box,and a few other things we usually remove.In my experience,it hasn't hurt a thing,and,when I remove the upper intake,no water to deal with.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Oct 30, 2010
#7
  • Oct 30, 2010
  • #7
Has anyone considered that the coolant lines might be there to actually heat the throttle body? Ice can form on the throttle body during times of low airflow, low air inlet temps and high humidity. Anytime you have a pressure drop across an orifice, the temperature of the gas flowing past the orifice drops. That principle is what makes the air conditioning in the car work. You might not think of a throttle butterfly as being an orifice, but that is exactly what it is.

Carb cars have problems with icing of the throttle butterfly. In piston engine airplanes there is a setup to direct hot air to the carb inlet to prevent icing in flight.
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Oct 30, 2010
#8
  • Oct 30, 2010
  • #8
jrichker said:
Has anyone considered that the coolant lines might be there to actually heat the throttle body? Ice can form on the throttle body during times of low airflow, low air inlet temps and high humidity. Anytime you have a pressure drop across an orifice, the temperature of the gas flowing past the orifice drops. That principle is what makes the air conditioning in the car work. You might not think of a throttle butterfly as being an orifice, but that is exactly what it is.

Carb cars have problems with icing of the throttle butterfly. In piston engine airplanes there is a setup to direct hot air to the carb inlet to prevent icing in flight.
Click to expand...

Yes, I am well aware that it is there to warm the throttle body. As none of my cars leave the garage during the winter, it is not a consideration for me. That and the fact that the Cobra doesn't have it, so it can't be a very major consideration.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Oct 30, 2010
#9
  • Oct 30, 2010
  • #9
wythors said:
Yes, I am well aware that it is there to warm the throttle body. As none of my cars leave the garage during the winter, it is not a consideration for me. That and the fact that the Cobra doesn't have it, so it can't be a very major consideration.
Click to expand...

It must be nice to be one of your cars and never have to go out in the cold...

The rest of us are not so blessed, so we get to put up with the trauma of driving in the winter. I am glad there was some though given by Ford engineers to prevent this problem. It kills a few airplane drivers each year because they don't think about it until the engine quits running and won't restart. Gee, the ground is coming up awfully fast...
 

jpchefz

New Member
Dec 27, 2003
10
1
1
Fort Wayne, IN
Oct 31, 2010
#10
  • Oct 31, 2010
  • #10
Thanks for info. I am going to leave it alone!
 
You must log in or register to reply here.

Similar threads

K
86 GT Water Pump
  • Kade5114
  • May 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
99
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2026
nickyb
Engine Water hoses that feed throttle body
  • Mcmahst
  • Apr 8, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
723
Fox 5.0 Mustang Tech Apr 11, 2025
Mcmahst
H
Engine 1987 5.0 HO vacuum hose locations
  • harryhaber
  • Jun 20, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
505
Fox 5.0 Mustang Tech Jun 21, 2025
limp
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
846
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Engine on3 Conversion to draw through MAF?
  • sav22rem22
  • Oct 11, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
272
Fox 5.0 Mustang Tech Oct 11, 2025
sav22rem22
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?