So I have a 306 that SUPPOSEDLY has 10.5 to 1 compression.
The heads are 55cc.
what CR would I have with pistons that are supposed to get 8.21 to 1 on a 63cc head?
im trying to find a decent forged piston to lower my CR so I can install a S-trim without fear.
Current combo:
- AFR 185 heads
- Edelbrock Performer or Holley SysteMAX intake (its got a cobra right now)
- E303
- 1.7RR, may put the 1.6's back on
- SN95 Fuel Rails
- 30lb/hr injectors
- 195lph pump
Want to add: S-trim with 3.33 pulley and 6.87 crank pulley
and the necessary pistons to achieve a boost happy CR
The heads are 55cc.
what CR would I have with pistons that are supposed to get 8.21 to 1 on a 63cc head?
im trying to find a decent forged piston to lower my CR so I can install a S-trim without fear.
Current combo:
- AFR 185 heads
- Edelbrock Performer or Holley SysteMAX intake (its got a cobra right now)
- E303
- 1.7RR, may put the 1.6's back on
- SN95 Fuel Rails
- 30lb/hr injectors
- 195lph pump
Want to add: S-trim with 3.33 pulley and 6.87 crank pulley
and the necessary pistons to achieve a boost happy CR