• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cam end play.???

  • Thread starter Thread starter TC93
  • Start date Start date Jun 14, 2008

TC93

Well-Known Member
Sep 11, 2000
2,075
1
57
Ellerslie GA 31807
Jun 14, 2008
#1
  • Jun 14, 2008
  • #1
I am little confused on checking cam end play. Did a search and come up with different ways of checking it. The way I did it, is put the thrust plate and cam gear on. Then used a dail caliper on the face of the came gear and moved cam back and forth. Got a movement of .040. The roller thrust plate I have stated .004-.014 is recommended.


So I did the search, to see what I need to take up the extra space. But I found people saying different ways of checking it. I did it like how comp cam said do it, with a dail caliper and move cam back & forth in block. But the I read where people say "End Play" is the clearance between the back of the cam gear and the front of the cam. And can use a feeler gauge to check... And can be done with cam out of motor..


Any input on this will be 'GREATLY APPRECIATED!!!"
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Jun 14, 2008
#2
  • Jun 14, 2008
  • #2
when you put the top gear and bolt on it cant move anywhere it gets sandwiched then held in place by the dampner snout pushing the bottom gear tight against the crankshaft.
 
You must log in or register to reply here.

Similar threads

D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
522
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
A
Discussion on mild budget build/ top end
  • Acesario
  • Feb 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 23, 2026
General karthief
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
315
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
533
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
First Car, what should I do for power??
  • tunedV6
  • Apr 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
455
1996 - 2004 SN95 Mustang -General/Talk- May 4, 2026
580HP*428Cj
5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?