I am in the build stages of my 347 project and i just found out the cam i have for the engine will not work. It is an Edelbrock performer rpm cam 1500-6500 rpm that i thought would work great with my edelbrock performer rpm 2 intake but the firing order for the cam is not the HO firing order. So my question to you guys is what cam should i go with. I would like to have a 1500-6500 power band and an awsome sound at idle. So should i spend the cash and get a cam made for me and if so how much are they or should i get some thing off the shelf like a trick flow stage 2 cam. So you guys know it is about 10.5to1 comp ratio motor with patriot heads and the edelbrock intake let me know what you guys would do. HELP PLEASE ohh and i dont want it to be to high of lift like .565 or under thanks