• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cam question regarding a possible blower install

  • Thread starter Thread starter 87ttopstang
  • Start date Start date Jun 13, 2006

87ttopstang

Member
Apr 14, 2003
342
0
17
Ontario, Canada
Jun 13, 2006
#1
  • Jun 13, 2006
  • #1
Ok guys, I am thinking of installing a Vortech A-Trim. I think I can get a used one from a decent guy from this forum

My question is regarding my cam that I currently have. For any one with some real experience with blowers, I'd like your opinion.

I am running the Ford Racing X-303 cam. I have forged Keith Black pistons, edelbrock performer rpms, eagle h-beam rods, 1.7 rockers, Pro M 75mm MAF, 70mm TB, 30 # injectors, 255 lph holley fuel pump.

My compression is 9.5:1

I want to run approx 8 psi of boost. Nothing major, rather conservative.

Will I have to change my cam or can I still us the X-303?

I think I will have to go to 42# injectors and increase the size of the MAF, then get it tuned, but does anyone else see any real problems with the combo I have?

I don't care if it is the fastest car out there, I'd just like it to run smoothly.
 

87ttopstang

Member
Apr 14, 2003
342
0
17
Ontario, Canada
Jun 14, 2006
#2
  • Jun 14, 2006
  • #2
Someone in here must know if it is possible to run an X 303 with a blower.
 

88Stang331

New Member
Mar 30, 2006
239
0
0
Jun 14, 2006
#3
  • Jun 14, 2006
  • #3
of course its possible, but as far as performance, i think i speak for alot of people on here when i say go with a custom cam.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jun 14, 2006
#4
  • Jun 14, 2006
  • #4
My suggestion would be to drop your initial boost to roughly 6 psi. Tune the combo with what you've currently got including the 30 lbers with addition of an adjustable fuel pressure regulator.

I probably don't have to tell you that when I say Tune then I mean TUNE with either a wideband or a dyno.

That will at least answer your question about the x-cam without having to spend a mint on stuff that you may end up replacing later.

Word of mouth is that the X is not the most desirable blower cam but that it WILL work and you will see a significant gain with a blower.
 

87ttopstang

Member
Apr 14, 2003
342
0
17
Ontario, Canada
Jun 14, 2006
#5
  • Jun 14, 2006
  • #5
Daggar said:
My suggestion would be to drop your initial boost to roughly 6 psi. Tune the combo with what you've currently got including the 30 lbers with addition of an adjustable fuel pressure regulator.

I probably don't have to tell you that when I say Tune then I mean TUNE with either a wideband or a dyno.

That will at least answer your question about the x-cam without having to spend a mint on stuff that you may end up replacing later.

Word of mouth is that the X is not the most desirable blower cam but that it WILL work and you will see a significant gain with a blower.
Click to expand...

I already have an adjustable FPR. From what I hear, the X should be ok to run with a small blower. Like I said earlier, I am not looking to make crazy horsepower with this blower. Just a little extra. I know the A-Trim will not give me a high amount of boost, but I only want 6-8 psi.

I plan on brining it to be tuned before I even start it with the blower. I will trailer the car there.
 
You must log in or register to reply here.

Similar threads

J
Engine Tuning...?
  • justadude07
  • May 30, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
400
Fox 5.0 Mustang Tech Aug 21, 2026
Qtrhrse23
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
A
A/F ratio gauge install questions.
  • AngryH58
  • Sep 24, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
257
1996 - 2004 SN95 Mustang -General/Talk- Oct 22, 2026
Noobz347
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
293
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?