• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Cam Shafts Help......

  • Thread starter Thread starter red_stang_225
  • Start date Start date Aug 4, 2005
R

red_stang_225

New Member
Aug 4, 2005
14
0
0
Aug 4, 2005
#1
  • Aug 4, 2005
  • #1
Cam Shafts Help
hi guys

im a new member here so i need some help for my friend

its a 2001 Automatic tranny

and here is the stuff

3.73 ratio
long tube hooker headers
BBK H pipe
40 series flowmaster mufflers
75mm BBk throttle
BBK ram air
K&N filter
BBK pullys
TCI cooler gear
Shift kit transgo
SCT computer programmer
intake flow and spacer

so we need a good cam for these parts

what do u guys prefer?

and wich converter is good with the cam lift?

yeah and we need all parts we need for the cam shafts

springs,lockers,,,,etc

so plz we need ur help
 

stangman

15 Year Member
Jul 10, 2003
2,690
10
69
in a 3 bed, 2 bath
Aug 4, 2005
#2
  • Aug 4, 2005
  • #2
i have VT stage 1 cams & love them if you are wanting to get something mild like them you won't need new springs, but anything more aggressive than the 1's & then you'll need the springs. also, www.modularpowerhouse.com make a very nice custom grind
 
B

BLKsteeda

New Member
Jul 12, 2004
236
0
0
Anywhere
Aug 4, 2005
#3
  • Aug 4, 2005
  • #3
VT Stage 1's!!!!!!
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Aug 4, 2005
#4
  • Aug 4, 2005
  • #4
For a GT with those mods, I'de get a 3000+rpm stall converter from Precision Industries with a set of VT Engine Stage II cams.

EDIT: With Stage II cams, you will need aftermarket valve springs.
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Aug 4, 2005
#5
  • Aug 4, 2005
  • #5
3600 stall from Circle D.

VT Stage II's w/Comp springs.

Oh, and lose the transgo! Go with the Jerry mod.
 
R

red_stang_225

New Member
Aug 4, 2005
14
0
0
Aug 4, 2005
#6
  • Aug 4, 2005
  • #6
but what's the Jerry mod. ..????
 
R

red_stang_225

New Member
Aug 4, 2005
14
0
0
Aug 5, 2005
#7
  • Aug 5, 2005
  • #7
here are the info of my dyno test ....
max power= 228.11
max torque= 265.40
run type = ro run conditions : 39.08 ْc , 29.84 in-hg , Humidity: 39% , SAE: 1.04


so is't good ...???
 
9

98MACH1R

I wanna put it in so bad, please help.
Jun 6, 2005
131
0
0
Aug 5, 2005
#8
  • Aug 5, 2005
  • #8
hey dude im not knocking you but those numbers look kinda low is you a/f ratio out of wack or something?
 
R

red_stang_225

New Member
Aug 4, 2005
14
0
0
Aug 5, 2005
#9
  • Aug 5, 2005
  • #9
red_stang_225 said:
but what's the Jerry mod. ..????
Click to expand...

?????
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Aug 5, 2005
#10
  • Aug 5, 2005
  • #10
red_stang_225 said:
?????
Click to expand...

http://www.tccoa.com/articles/tranny/shiftybusiness.html

The Jerry mod shift kit is a shift kit that uses the stock valve body and seperator plate. You just need to enlarge some holes and remove a few springs from the ac***ulator pistons. That link should guide you through how to do it. Although its a Thunderbird and Cougar club and the article was written for Thunderbirds, still, the Thunderbird uses the same transmission as our Mustangs do in the automatic versions, the 4r70w automatic to be specific. It should make the differences between the years and versions clear and what to do for your application.
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Aug 5, 2005
#11
  • Aug 5, 2005
  • #11
98MACH1R said:
hey dude im not knocking you but those numbers look kinda low is you a/f ratio out of wack or something?
Click to expand...
You must remember, he does have an automatic transmission. They tend to produce lower numbers. I will agree though, for his mods the numbers are just a tad low.
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Aug 5, 2005
#12
  • Aug 5, 2005
  • #12
Yeah, I'd have to agree. I made the same power with 4.10's, CAI, Bullitt intake, o/r X, and a mail order tune.
For having a cat-back, L/T's, and a higher gear, he should be in the mid to high 230's.
 
R

red_stang_225

New Member
Aug 4, 2005
14
0
0
Aug 5, 2005
#13
  • Aug 5, 2005
  • #13
thnx guys

ok im another friend for the owner of this user he told me to log in here

ok

the owner of the GT wnet to so many places and everybody told him nothing wrong so how can he know if there is something wrong

and when he floor it from 0 the RPM stick at 3000's a few seconds then it goes up normal,why is that?

maybe there is something wrong in the drive train

from tranny or the final end

btw the rear tires are 295/50/15

i think they r too heavy
 
R

red_stang_225

New Member
Aug 4, 2005
14
0
0
Aug 6, 2005
#14
  • Aug 6, 2005
  • #14
,,,,,,,,,,,,.............???
 

'01 Steed

Founding Member
Aug 2, 2002
482
0
16
Michigan
Aug 6, 2005
#15
  • Aug 6, 2005
  • #15
His #'s may just be lower than the average (there's an average for a reason). As far as the rpm hangin' at 3K; that's probably that POS Transgo kit. Like I said, lose that junk and see where you're at afterward.
 

Dark Knight GT

I can't get it up......ok that didn't sound right.
May 26, 2003
3,653
2
56
Ozark, Missouri
Aug 6, 2005
#16
  • Aug 6, 2005
  • #16
red_stang_225 said:
thnx guys

ok im another friend for the owner of this user he told me to log in here

ok

the owner of the GT wnet to so many places and everybody told him nothing wrong so how can he know if there is something wrong

and when he floor it from 0 the RPM stick at 3000's a few seconds then it goes up normal,why is that?

maybe there is something wrong in the drive train

from tranny or the final end

btw the rear tires are 295/50/15

i think they r too heavy
Click to expand...
Tell me, is there any tire spin when he floors it from a dead stop ? If so, that could explain the rpm sticking and hesitating to climb. Two, is the stock torque converter still in the car or is there an aftermarket torque converter in there ? '01 Steed could be correct. The transgo shift kit could be messing something up if not installed properly. One thing to remember with ANY shift kit is never put any blocker rings in the accumulator pistons and NEVER EVER increase/decrease line pressure unless if you know what you're doing.
 
You must log in or register to reply here.

Similar threads

S
Best place to source power steering parts for a '67? (control valve, ram, hoses)
  • SophiaTatum
  • Jun 15, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
216
Classic Mustang Specific Tech Jun 18, 2026
SophiaTatum
S
Gt40 e303 combo questions
  • 99mustanggt2018
  • Mar 30, 2025
  • 1994 - 1995 Specific Tech
Replies
2
Views
548
1994 - 1995 Specific Tech Mar 30, 2025
KRUISR
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 28, 2026
from6to8
Fox 89’ GT 331 stroker, Trickflow upper/lower, TF#3 Cam, stuffed with forged goodies.
  • 08GT500
  • Nov 6, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
909
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 6, 2025
08GT500
S
87 GT with cam and headers. Do I need an aftermarket manifold and TB
  • Scarlet Fox
  • Nov 12, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
533
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 16, 2024
65ShelbyClone
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?