Today I changed out my cams. I used a ford cam tool and everything went pretty smooth. When I went to fire it up is when the sh1t hit the fan. It runs like the timing is horribly off. I never let the tension off of the chains and sprockets when swapping the sticks and I used the RH with the RH and LH on the LH. Is there someting I could have overlooked? I figured I'm going to pull the front end off next weekend but until then is there anything I can check out that may cause this? I tripple check all my connections on wires that i disconnected, the cam sensor is in place and connected. Rigt now I'm just too exhausted to try and brainstorm, maybe it's something simple I've overlooked but your help would be awesome...thanks