Camshaft question

[TE56]

I have a 91 lx and i wanted to cam it but i didnt know if i got the mild cam if i have to change the rockers or will the stock ones be ok. Im not putting a real lot of work into the car, only full exhaust, bigger throttle body, intake manifold, and gears (maybe some other things). Thank you

 

[TwoToneHatch]

If your not putting on a set of heads and are just sticking to some bolt on dont waste your time unless you really just want the sound.

 

[TE56]

yeah im not doing heads, its my 1st mustang, and im only 19 i dont have that kind of money yet, im gonna end up building one in the future

 

[Mustang5L5]

You dont have to change the rockers, but you might have to change the springs depending on the cam.

Just get an E cam or B cam. Lift is close to stock and you'll get that sound and a bit more power

 

[DucatiRdr]

Why not go for 1.72 roller rockers? I have them and my car idles smoothly and seems to have a little more than it did before. Then again I'm 22 years older than you so I don't need to wave the flag.