Can I Get Rid of it?

95strokerPSU · Jun 12, 2006

I'm assuming it's the charcoal canister, right? What exactly does it do and can I get rid of it without any problems or a CEL. I don't have smog or EGR and I only have vac lines from my upper intake running to FP and the brake booster. I deleted the vac tree and don't use my HVAC or cruise.

Thanks guys
Dave

95strokerPSU · Jun 12, 2006

Alright I figured out it's the EVAP purge solenoid. Can I just remove it and leave the line going back to the charcoal canister open?

1TallMF · Jun 12, 2006

Why do you want to get rid of it in the first place? If it were me I'd leave it alone, I've heard bad things about taking out the purge solenoid, such as the lingering smell of fuel vapours. I'm not sure if it will throw a code though.

95strokerPSU · Jun 12, 2006

Not too concerned about the smell of fuel. I just don't want a CEL, any driveability issues, and I want to make sure that my gas tank is still venting properly.

I removed it strictly for comestics.

Dave

HISSIN50 · Jun 12, 2006

Dave, if you ever park near a light pilot light, I'd keep the system closed. I bet you could run the hose behind the plastic firewall cover, etc (to help aesthetics). I know you asked nothing about that, but it was worth bringing up, just in case..........

I really dont know about the CEL issue since I still have that crap (just replaced the lines on it not long ago because the fuel smell was driving me nuts. The line egressing the cannister was cracked). Bump for ya.

Good luck.

95cobraguy · Jun 12, 2006

i deleted all of that junk, no problems whatsoever.

95strokerPSU · Jun 12, 2006

95cobraguy said:
i deleted all of that junk, no problems whatsoever.

Did you have it turned off with a tune or tweezer?

gcomfx.com · Jun 12, 2006

I just deleted mine, no tweecer here. I pulled out the whole charcoal canister as well. I capped the line coming from the tank going to the charcoal canister.

You "sometimes" get pressure built up in the tank.... when removing the fuel cap you'll get a big WHOOOOOOOSSSSSHHHHHHH!

Oh, I have yet to remove the line of gizmos at the top of the fender area. Lots of sensors and funky stuff going on up there. Thought about unplugging it all and seeing if it caused problems. Anyone know?

SeventyMach1 · Jun 12, 2006

If just for cosmetic reasons, I would just relocate it. Just my opinion.

BTW, this may be an extremely stupid question .... but would this cause any type of vapor lock issues?

HISSIN50 · Jun 12, 2006

Justin, not a stupid question. With our high pressure pumps, I personally dont believe we can get vapor lock (people have debated me a little on this though).

Paul, what happens if the pressure relief in the gas cap fails (it's the back-up relief mechanism for the EVAP system).

I suppose is someone is really set on removing the CC, perhaps keeping the purge solenoid around and just venting it (the solenoid and its line can be relocated out of sight since it isnt connected to the intake any more). The purge solenoid would still function to seal the system a bit. Just another option..............

95strokerPSU · Jun 13, 2006

I think I'm gonna keep the charcoal canister and the solenoid and just stick it in the fender and have it purge there. Should be safer than having an open line and it will be out of view.

gcomfx.com · Jun 13, 2006

HISSIN50 said:
Justin, not a stupid question. With our high pressure pumps, I personally dont believe we can get vapor lock (people have debated me a little on this though).

Paul, what happens if the pressure relief in the gas cap fails (it's the back-up relief mechanism for the EVAP system).

I suppose is someone is really set on removing the CC, perhaps keeping the purge solenoid around and just venting it (the solenoid and its line can be relocated out of sight since it isnt connected to the intake any more). The purge solenoid would still function to seal the system a bit. Just another option..............

My tank turns funny shapes. BTW - The cap I have on the line is just a vaccum line cap with a small zip tie on it. I am pretty sure that will pop off before the tank gives.

Also, I removed mine if you will remember because my overflow for the charcoal canister was pouring fuel fumes into the engine compartment. That has stopped. I don't think my solenoid was working anyway.

HISSIN50 · Jun 13, 2006

gcomfx.com said:
Also, I removed mine if you will remember because my overflow for the charcoal canister was pouring fuel fumes into the engine compartment. That has stopped. I don't think my solenoid was working anyway.

Oh yeah, I forgot about that.

Dave, what you outlined is how I would have done it too.

gcomfx.com · Jun 13, 2006

Also, I thought the gas cap only let air IN, not out.... thus the WHHOOOOSSSSHHHH???

HISSIN50 · Jun 13, 2006

gcomfx.com said:
Also, I thought the gas cap only let air IN, not out.... thus the WHHOOOOSSSSHHHH???

They vent outward in case of excessive pressure so the tank doesnt rupture.

The whoosh is from the tank vent having a restriction.

Methodical · Jun 13, 2006

95strokerPSU said:
Alright I figured out it's the EVAP purge solenoid. Can I just remove it and leave the line going back to the charcoal canister open?

It will probably throw Code 565.

gcomfx.com · Jun 14, 2006

I've only checked my codes once since I removed my solenoid, but I did not get any code.

95Vert · Jun 15, 2006

So the smell of gas fumes went away when you removed all of this?

gcomfx.com · Jun 15, 2006

95Vert said:
So the smell of gas fumes went away when you removed all of this?

Yes.... in the engine compartment. This won't stop the smell of gas from a catless car though.

95Vert · Jun 15, 2006

gcomfx.com said:
Yes.... in the engine compartment. This won't stop the smell of gas from a catless car though.

That's really what I want to get rid of! I don't have a problem with the smell of gas under my hood, it's coming from my exhaust.

Can I Get Rid of it?

95strokerPSU

Member

Attachments

95strokerPSU

Member

1TallMF

New Member

95strokerPSU

Member

HISSIN50

"How long does it take to get help in here?

95cobraguy

Member

95strokerPSU

Member

gcomfx.com

SeventyMach1

Keep it lubed .... keep it straight .... and keep

HISSIN50

"How long does it take to get help in here?

95strokerPSU

Member

gcomfx.com

HISSIN50

"How long does it take to get help in here?

gcomfx.com

HISSIN50

"How long does it take to get help in here?

Methodical

gcomfx.com

95Vert

New Member

gcomfx.com

95Vert

New Member

Similar threads

Can I Get Rid of it?

Member

Attachments

Member

New Member

Member

"How long does it take to get help in here?

Member

Member

Keep it lubed .... keep it straight .... and keep

"How long does it take to get help in here?

Member

"How long does it take to get help in here?

"How long does it take to get help in here?

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency