I am going to measure with clay asap,
but I plan on using a set of Edelbrock performer heads with the 2.02 valves, and a POWERMAX 2030 270-444221 CompuCam ; Adv. Dur. 270 Int./278 Exh.; Valve Lift .533 Int./.544 Exh.; Lobe Angle 112 deg.;
My pistons do have reliefs for the valves, but it seems they are only cut for the smaller valves. (1.90?) Is there anyway this could work? The only way I see it working is if my combo would work with stock, non relieved pistons.
but I plan on using a set of Edelbrock performer heads with the 2.02 valves, and a POWERMAX 2030 270-444221 CompuCam ; Adv. Dur. 270 Int./278 Exh.; Valve Lift .533 Int./.544 Exh.; Lobe Angle 112 deg.;
My pistons do have reliefs for the valves, but it seems they are only cut for the smaller valves. (1.90?) Is there anyway this could work? The only way I see it working is if my combo would work with stock, non relieved pistons.