• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cant find answer to window issue

  • Thread starter Thread starter nards444
  • Start date Start date Apr 19, 2020
N

nards444

Member
Feb 18, 2020
68
18
18
NY
Apr 19, 2020
#1
  • Apr 19, 2020
  • #1
87 GT. Power window. Window goes up and down. Issue is it sort of goes up crooked and seems loose going up and down. Pulled the door apart and pulled motor out. Motor seems fine, but has is full of hard grease rocks. Bushings at least one needs to be replaced. Before I take time and money to replace the whole unit any thoughts here. All teeth on the motor and the internal gear look ok, dont know if this is normal is the plastic gear inside once seated does have some play. Also window rolled all the way up pull motor and the window drops thought it was supposed to stay.

Do I need bushings and regrease only or maybe some parts thrown at it?
 
N

nards444

Member
Feb 18, 2020
68
18
18
NY
Apr 19, 2020
#2
  • Apr 19, 2020
  • #2
after looking further the bushings in the motor were gone. Kind of think replacing those, guide bushings and grease job should fix it. ??
 

Habu135

5 Year Member
Jan 10, 2019
1,217
766
133
California
Apr 19, 2020
#3
  • Apr 19, 2020
  • #3
nards444 said:
after looking further the bushings in the motor were gone. Kind of think replacing those, guide bushings and grease job should fix it. ??
Click to expand...
Yes, you need new window guide bushings. Very easy fix. The driver side usually gets twice or maybe even three times the use as the passenger's side. Dont be surprised if your power window motor goes out soon as well. Amazon sells an inexpensive one as compared to other Mustang product supporters.
 
N

nards444

Member
Feb 18, 2020
68
18
18
NY
Apr 19, 2020
#4
  • Apr 19, 2020
  • #4
thanks.
 

General karthief

wonder how much it would cost to ship you a pair
5 Year Member
Aug 25, 2016
27,844
10,520
203
polk county florida
Apr 19, 2020
#5
  • Apr 19, 2020
  • #5
Check the discs that hold the window guide to the glass too
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,811
234
Dublin GA
Apr 21, 2020
#6
  • Apr 21, 2020
  • #6
Power Window tips & tricks

Motor removal & replacement

Remove the door mounted speaker & the upholstery panel to gain access to the motor. There are 3 screws (5/16" hex head, I think) that secure the motor in place. Remove them and the motor comes out without any problems. Once you remove all the screws from the motor, and it falls away from the gear teeth on the arm for the glass, the glass will move up and down. You may need a helper to hold the glass once the motor screws are out, since the gear on the motor holds the glass from sliding up or down

Motor interchange
The motor is the same for left side or right side, only the gearboxes are different. If you can't find the complete assembly for the side you want, you can get either side and use the old gearbox on the new motor.

The window motor gearbox has 3 plastic rollers that are a safety clutch to prevent possible injury if the window is rolled up while something or someone is hanging out the window. The plastic rollers will often disintegrate into chunks of plastic and the window will no longer roll up or down. The motor runs, but the window does not move or only move a little.


The Help! section of your local auto parts store will have the replacement plastic rollers.
See NAPA Window Regulator Gear Plug



Napa p/n Balkamp 6651524

Cost is 9.49$

AutoZone and other auto parts stores see Dorman 74410 / Window Lift Motor Gear Kit
Cost is $7.99

Power Window Wiring Diagrams

Diagrams courtesy of Tmoss & Stang&2birds

Fuse panel and circuit breaker layout


87-92 model cars power window wiring:



93 model cars power window wiring:


See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host) for help on 88-95 wiring Mustang FAQ - Wiring & Engine Info Everyone should bookmark
 
You must log in or register to reply here.

Similar threads

T
Fox Convertible top issues
  • TDM389
  • Feb 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
253
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 15, 2026
General karthief
S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
795
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
H
Ongoing Battle With Hydraulic Lifters
  • hailer06
  • Jun 8, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
131
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 9, 2026
Noobz347
Fox Suspensión Noise
  • PonyGTrider
  • Nov 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
346
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 8, 2026
PonyGTrider
C
Knocking after pull- went away?
  • Connormcclark
  • Oct 6, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
4
Views
208
1996 - 2004 SN95 Mustang -General/Talk- Oct 6, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?