cant pull codes?? HELP!!

still fighting my missing problem with the small amount of time i have....to sum it up i have tried numerous times to pull codes from the computer with a analog multimeter and the test light method....hooking everything up the right way of course (ive done this 1000's of times) even tapping into the wires before they go into the connector in case the connector is bad...and i dont get anything no blinks no sweeps nothing at all....what gives?!?! is my computer bad?? im thinking the problem would be revealed in a code but i cant get any anybody?????

:EDIT: here is the link to my post http://forums.stangnet.com/showthread.php?t=498264

i have checked/replaced alot of things including
new-
plugs
wires
cap
rotor
FF
coil

checked-
timing
all injectors are clicking
balancer
timing chain

i have a spare FPR and TFI im gonna put on tomorrow and see if that helps...but i really need to get codes out of this thing

thanks guys ill try that jr...im thinking the comp may be behind all this also.....

anybody else???????