Car Got Stuck In Rev Today???

demented22

Member

Nov 26, 2011

222

6

18

pittsburgh, pa

May 26, 2012

#1

• May 26, 2012

• #1

Jumped in my car today, started it, and put it in reverse. Backed up ten feet or so and the shifter wouldn't come out of reverse. After useing some force it came out, then shifted normal. Info: 2000 gt, 5spd with a tri ax shifter. 90,000 miles. Any ideas? I am going on a car rally 3rd week of June and really don't want any problems. Thanks

 

RedWings44

Member

May 19, 2012

179

5

19

May 26, 2012

#2

• May 26, 2012

• #2

Not sure. Was it the shifter itself? Or the button on the shifter wouldn't push? I know in my 98, when the transmission/engine is cold, my button doesn't like to push without extra force when it is in park.

 

demented22

Member

Nov 26, 2011

222

6

18

pittsburgh, pa

May 26, 2012

#3

• May 26, 2012

• #3

Sorry it's a 5spd. This one has me confused. I've had them not want to go into gear, a quick catch of 4th or 2nd normally straightens it out. this was strange to me

 

Night Shifter

Well-Known Member

Dec 24, 2005

1,710

27

59

Daytona

May 26, 2012

#4

• May 26, 2012

• #4

Id bet its your cable crapping out on you...is it a factory cable or an adjustable? I got locked in both 1sttimes and reverse when my cable started stretching which caused it to bind up

 

RedWings44

Member

May 19, 2012

179

5

19

May 26, 2012

#5

• May 26, 2012

• #5

Ya. I'm definitely not a transmission guy...but I thought I'd interject with my own experience

 

demented22

Member

Nov 26, 2011

222

6

18

pittsburgh, pa

May 27, 2012

#6

• May 27, 2012

• #6

On a whim I ordered new cable, adj., and steeda quadrant Thursday night. Then this happens Saturday, maybe I am psychic hahaha? Hope thats all it is.

 

Night Shifter

Well-Known Member

Dec 24, 2005

1,710

27

59

Daytona

May 27, 2012

#7

• May 27, 2012

• #7

Lol nice...did you order an adjustable cable or a factory one? If adjustable, make sure you keep an eye on the adjuting nut on the clutch fork end of the cable....they tend to back out if adjustment causing the cable to bind up and youll bw in the same postition your in now

 

demented22

Member

Nov 26, 2011

222

6

18

pittsburgh, pa

May 27, 2012

#8

• May 27, 2012

• #8

I got an adjustrable cable. Would double nut help lock it in place? Also what is the proper adjustment? How much free play?

 

Night Shifter

Well-Known Member

Dec 24, 2005

1,710

27

59

Daytona

May 27, 2012

#9

• May 27, 2012

• #9

They come with a double locking nut or something like that...my friend threaded the nut all the way to the cable on his then used locktite so it wouldnt back out...i tried that on mine but the clutch wouldnt engage for nothing...

I ended up putting the adjustable nut about in the middle of the threads...worked fine that way...it backed off a while after that but i readjusted it and it worked fine again....not sure of the proper place it should be...just keep on top of it and you shouldnt have any problems..i dont think its suppoed to have any free play but it cant be increadibly tight either...you dony want constant pressure on your throwout bearing