car staling

[94_gt]

i have a 1994 mustang gt its all stock except for a b303 cam. it ran good stock no problems ntill i put the cam in now it will not idle when warn it fluxuwates from about 8-1200 rhen it stalls. i really need help.

 

[stprorolla49]

i have a 1994 mustang gt its all stock except for a b303 cam. it ran good stock no problems ntill i put the cam in now it will not idle when warn it fluxuwates from about 8-1200 rhen it stalls. i really need help.

our computers in teh 94-95 don't tolderate cam changes too well......they have have teh perfect cam profile, and i think i remember reading that the b cam isnt so good in our cars without an aftermarket EEC.........with that being said, how come you got a cam instead of exhaust or something else...im sure u probably wont see more than about 5 hp with the cam with no other changes..........

 

[94_gt]

o ya i forgot i have a bbk off road h pipe and mac mufflers and tails. could yo tell em where i can get a cam that will work or what a good cam to use would be ?

 

[must b a stang]

The b303 cam came in my FMS crate engine, the cam needs a package set up to help the TM40 computer to work properly, i also have a PMS unit for self tuning but was not need for cam to work. IN short the b303 cam is to much for stock set up.

 

[must b a stang]

Steda makes a #19 cam made for 94-95 stangs, Anderson ford motorsports also makes one and i believe crane cams also has one.

 

[stprorolla49]

Steda makes a #19 cam made for 94-95 stangs, Anderson ford motorsports also makes one and i believe crane cams also has one.

yea i just PM'ed him and told him about the steeda 19 lol....beat me to it......should suit the duty just fine......