• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Car Starting Glitch

  • Thread starter Thread starter kpack5982
  • Start date Start date Feb 2, 2006

kpack5982

Yeah, it was pretty stiff, but eventually a buddy
Jul 13, 2005
325
1
19
Granger, IA
Feb 2, 2006
#1
  • Feb 2, 2006
  • #1
My 93's been starting to start up kind of funky. A few weeks ago it started to want to die right after it turned over and fired up. Well when i got done driving it today and went back to it, it turned over, but i had to continue pumping the gas to keep it alive. Once I did this a couple times it was fine and ran just as well as it always did. Any ideas what it could be?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Feb 2, 2006
#2
  • Feb 2, 2006
  • #2
throttle position sensor maybe? if computer doesn't know where that is it doesn't know how much fuel to give car.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 2, 2006
#3
  • Feb 2, 2006
  • #3
I would clean the IAC and see if the idle needs to be set correctly.

Good luck.
 

kpack5982

Yeah, it was pretty stiff, but eventually a buddy
Jul 13, 2005
325
1
19
Granger, IA
Feb 2, 2006
#4
  • Feb 2, 2006
  • #4
Already cleaned the iac, don't have a voltmeter to check the tps, but can an auto parts store check that for me? You don't think it could be the injectors or fuel pump do you? already replaced the fuel filter
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Feb 2, 2006
#5
  • Feb 2, 2006
  • #5
It sounds like you might want to start at the top and retrieve codes.

How do you clean the IAC and check the idle if you dont have a voltmeter?

Harbor Freight puts DMM's on sale for 3-5 bucks all the time. I would grab one for this type of testing (though I seem to recall that 86BC doesnt approve of using such tools).

Good luck.
 

kpack5982

Yeah, it was pretty stiff, but eventually a buddy
Jul 13, 2005
325
1
19
Granger, IA
Feb 2, 2006
#6
  • Feb 2, 2006
  • #6
well i cleaned out the iac and replaced the gasket in hopes it would smooth out my idle and it DID help a little, along with cleaning out the maf wires and connections, seems to idle fine, right around 900, any below that and it dies. So i could go and pick up a dmm that cheap? I had no idea. so i should prolly check to see if it is reading the correct volts, like .97 to .98 I think and if not what would the next step if that doesn't fix the problem?
 
You must log in or register to reply here.

Similar threads

S
92 5.0 almost starts
  • Steverino
  • Sep 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
276
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 25, 2026
General karthief
9
1997 gt Starts then dies a few seconds after.
  • 97orange
  • Aug 13, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
311
SN95 4.6L Mustang Tech Aug 17, 2026
97orange
9
S
Need help asap
  • shaggyman65
  • Dec 24, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
321
1996 - 2004 SN95 Mustang -General/Talk- Dec 24, 2025
shaggyman65
S
H
Engine 1992 mustang LX starting issue
  • Hdbandit
  • May 25, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
187
Fox 5.0 Mustang Tech May 25, 2025
General karthief
L
Engine Why won't the motor start if I have spark and fuel
  • LeviAnderson
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
567
Fox 5.0 Mustang Tech Nov 20, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?