• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

car temperature running hot

  • Thread starter Thread starter bro78
  • Start date Start date May 20, 2004
B

bro78

New Member
Oct 6, 2001
10
0
0
Gainesville, FL
May 20, 2004
#1
  • May 20, 2004
  • #1
I recently had my car fixed a couple of weeks ago, water pump replaced and thermostat. However, the temperature still runs up around 260-270. Is this normal or should I take it back to where it was fixed?
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
May 20, 2004
#2
  • May 20, 2004
  • #2
260-270????? That is REALLY hot. Ideal temp for a mustang is around or below 200 degree's.

Are you taking this reading from the stock gauge? If so, i'd get an autometer gauge hooked up asap so you know the real temp of your motor. Stock gauges are inaccurate as hell, they're garbage.
 

LX-Markham

Founding Member
Apr 17, 2002
816
0
16
Markham, Ontario
May 20, 2004
#3
  • May 20, 2004
  • #3
270!?
on a stock gauge thats at the top!
you would definetly be boiling over.

either the sending unit and/or gauge is bad, or you have a more serious problem.
 
F

foxcobra

New Member
May 18, 2004
11
0
0
Phoenix, AZ
May 20, 2004
#4
  • May 20, 2004
  • #4
Sorry to hear about your problem. I live in AZ so i can relate. No, that high of a temp is not normal. Did you cheak the coolant recovery tank. If it is empty cheak your radiator. that shop may have forgotten to put in coolant. If it is full then the thermostat may be backwards. Assuming this overheating wasn't as bad as it was before you took it in. (of course is was to a degree. You did have your water pump replaced). If the recovery tank is full, is it boiling? and smell of exhaust gases ? does your Engine oil look like a milkshake ? If so, then you have a blown head gasket. Or it may be simply the temp sending wire is resting on the block it self, not connected. I don't see why the shop would have toutched it to begin with. Cheak these things out a let us know.
 

87VERT

Founding Member
Aug 1, 1998
1,275
0
0
Toronto,Ontario
May 21, 2004
#5
  • May 21, 2004
  • #5
That's waaay too high...especially with a new pump and thermostat. Not sure if this applies but perhaps the thermostat was placed in the housing backwards. This would cause your temps to reach that high. I'd definetly bring it back and have them check it out.
 

AUBURN1111

Founding Member
Oct 17, 2000
560
20
49
Mobile, AL
May 21, 2004
#6
  • May 21, 2004
  • #6
What kind of cooling fan do you have, factory or electric? If factory you should try to spin the fan blade with the engine off, there should be some resistance, if it spins freely the clutch is gone. Take a look for any oil leaks on the inside hub of the fan to see if the clutch is leaking oil.
 

C&R Racing

New Member
Apr 21, 2004
27
0
0
May 21, 2004
#7
  • May 21, 2004
  • #7
You may have got the wrong water pump installed. The serpentine belt pump runs the opposite direction to a v-belt pump, although either one bolts up.
 

88stangmangt

Active Member
Nov 25, 2003
2,332
1
48
Stafford,VA
May 21, 2004
#8
  • May 21, 2004
  • #8
ya i would try a autometer guage first off.
 
B

bro78

New Member
Oct 6, 2001
10
0
0
Gainesville, FL
May 21, 2004
#9
  • May 21, 2004
  • #9
Thanks everyone, I'm going to check it out over the weekend and let you all know how things go.
 
B

bro78

New Member
Oct 6, 2001
10
0
0
Gainesville, FL
Jun 1, 2004
#10
  • Jun 1, 2004
  • #10
after checking everything that all of you suggested, i found that the radiator just was so badly clogged that it wasn't getting enough flow to cool the engine properly. after installing a new radiator it runs like a dream again, thanks to everyone who replied.

Ben
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 1, 2004
#11
  • Jun 1, 2004
  • #11
Ben, im glad to hear you got it whipped. i would still advise you to get an aftermarket gauge. i kinda doubt that you were truly running that hot. since you have had issues and live in a hot climate, i would want to know what is REALLY goin on, temp wise.
again, glad to hear you got it whipped.
 
You must log in or register to reply here.

Similar threads

9
91 LX 5.0 getting hot when a/c is running
  • 91lx14gt5.0s
  • Jun 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
237
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 4, 2026
manicmechanic007
Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
776
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
R
Engine Fox body doesn’t run hot until I start driving
  • Rose5oh
  • Mar 17, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
1K
Fox 5.0 Mustang Tech Jun 7, 2025
limp
1990 Mustang with no-start condition - Fixed and how-to
  • TTSaleen
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
136
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 22, 2026
TTSaleen
M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
149
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?