• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Car wont start sometimes

  • Thread starter Thread starter 89conv.5.0
  • Start date Start date Apr 16, 2008
8

89conv.5.0

New Member
Apr 16, 2008
3
0
0
Apr 16, 2008
#1
  • Apr 16, 2008
  • #1
i have a 1989 5.0 auto my car wont start sometimes but it only happens once in a while like yesterday i started it up and drove it like for 10 mins then i turned it off then like 10 mins latter i went to start it and it wouldnt start then you let it sit for 30 mins to an hour then it will start up again i took it to a shop today and they cant find anything wrong with it if anyone can help me out that would be cool thanks alot
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Apr 16, 2008
#2
  • Apr 16, 2008
  • #2
This problem is as old as the dawn of man, it sounds like the TFI module is bad as usual, its the grey thing on the side of the distributor.

Get a new one and be sure to put some dielectric grease on the back of the new module so it wont overheat. You'll also need a special thin wall 7/32 socket to get if off, the deep well Duralast 7/32, 1/4 drive socket from AutoZone fits and it has more uses and is cheaper than the special TFI module wrench.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 16, 2008
#3
  • Apr 16, 2008
  • #3
Occasionally a PIP will act like this as well.

Take the TFI to the parts store for repeated bench testing. The repeated testing heats it up, simulating underhood conditions.

Good luck.
 
8

89conv.5.0

New Member
Apr 16, 2008
3
0
0
Apr 16, 2008
#4
  • Apr 16, 2008
  • #4
i dont know much about these cars yet ive only had it for like 2 months where is the pip at
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Apr 16, 2008
#5
  • Apr 16, 2008
  • #5
The PIP (pick up coil) is inside of the distributor, if thats bad then you have to replace the whole distributor. You can replace the PIP by its self but its a major PITA. More than likely its the TFI module.
 
8

89conv.5.0

New Member
Apr 16, 2008
3
0
0
Apr 16, 2008
#6
  • Apr 16, 2008
  • #6
ok thanks alot ill replace the tfi and see if that fixes it thaxs again
 
You must log in or register to reply here.

Similar threads

B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
J
Engine Stalling
  • josh40tay
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
200
Fox 5.0 Mustang Tech Oct 21, 2026
JD1964
B
2001 v6 New compressor issue
  • badmech
  • Apr 30, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
169
SN95 V6 Mustang Tech Apr 30, 2026
badmech
B
M
warmed up, hard re-starting on hot days
  • michaelleewebb
  • Mar 26, 2026
  • SN95 V6 Mustang Tech
Replies
9
Views
512
SN95 V6 Mustang Tech Mar 29, 2026
michaelleewebb
M
L
Engine Why won't the motor start if I have spark and fuel
  • LeviAnderson
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
565
Fox 5.0 Mustang Tech Nov 20, 2025
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?