• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Car wont start?? WTF

  • Thread starter Thread starter 03-s281
  • Start date Start date Jun 12, 2004

03-s281

New Member
Jan 20, 2004
421
0
0
Stangville,TN
Jun 12, 2004
#1
  • Jun 12, 2004
  • #1
Sometimes after driving my car for awhile it wont start back
up. Its like I'm not pushing the clutch in. The battery if fine and it does not click or anything, it just wont do *****. WTF
Could the starter be getting hot and fouling up? I dont want to take it to the dealer because of my mods. The o/r-x runs right beside the starter and I
know they will blame that.
Can Someone Help????
 

2001Saleen181

New Member
Mar 20, 2004
193
0
0
Jun 12, 2004
#2
  • Jun 12, 2004
  • #2
Are those long tube headers? If not, then the dealership should not have any problem with looking at it.

Also, if your starter is bad, they can not show that your headers caused your starter to malfunction. Even if you took the starter off and put it back on.
 

2001Saleen181

New Member
Mar 20, 2004
193
0
0
Jun 12, 2004
#3
  • Jun 12, 2004
  • #3
When my alternator went bad, my dealership replaced it, even though I had upgraded to the KB kit.
 
J

jbrown

New Member
Aug 5, 2003
393
0
0
Tallahassee, FL
Jun 12, 2004
#4
  • Jun 12, 2004
  • #4
That happened to me a few weeks ago. I wiped off the maf and just waited a while and it started right up. Check the IAC. Ive heard of others having this problem and thats how they fixed it.
 

03-s281

New Member
Jan 20, 2004
421
0
0
Stangville,TN
Jun 12, 2004
#5
  • Jun 12, 2004
  • #5
jbrown said:
That happened to me a few weeks ago. I wiped off the maf and just waited a while and it started right up. Check the IAC. Ive heard of others having this problem and thats how they fixed it.
Click to expand...

What exactly is the IAC?
 

2001Saleen181

New Member
Mar 20, 2004
193
0
0
Jun 13, 2004
#6
  • Jun 13, 2004
  • #6
I doubt its the IAC (Idle Air Control), because it sounds like your starter is not turning over sometimes. If it was the IAC then your motor would turn over but not start.

The IAC is located near the throttle body. It has a hose coming out of it and connects to one of the two ports on the Air Filter hose.
 
H

huesmann

Founding Member
Jun 21, 2002
332
0
16
Jun 13, 2004
#7
  • Jun 13, 2004
  • #7
With a clogged-up IAC valve your engine will still crank, it might even fire, but as soon as it does, it'll choke. You can keep it going by hopping on the throttle and staying on it a little.

Doesn't sound like the IAC though, since you're not even turning over. It does sound like a problem with some ignition component overheating, not some sensor or valve. Does the starting system need info from the computer to crank? Maybe your clutch interlock switch is shorting out and overheating or something? Does the car crank fine after you cool down?
 

03-s281

New Member
Jan 20, 2004
421
0
0
Stangville,TN
Jun 13, 2004
#8
  • Jun 13, 2004
  • #8
huesmann said:
With a clogged-up IAC valve your engine will still crank, it might even fire, but as soon as it does, it'll choke. You can keep it going by hopping on the throttle and staying on it a little.

Doesn't sound like the IAC though, since you're not even turning over. It does sound like a problem with some ignition component overheating, not some sensor or valve. Does the starting system need info from the computer to crank? Maybe your clutch interlock switch is shorting out and overheating or something? Does the car crank fine after you cool down?
Click to expand...

Yes, after the car sits for awhile it will start fine. I had my tuner check my x-pipe and they said it had a leak on the driverside. Since then it has only done it once.
 

BuffaloZone

New Member
Oct 14, 2003
411
0
0
Jun 14, 2004
#9
  • Jun 14, 2004
  • #9
I just fixed a Roush Mustang that a "Speed" shop and the Dealership gave up on - after they replaced a good starter and a good starter relay. The problem that I found was a bad ignition switch (not the keylock assembly). If you ever have a problem with your keylock you'll usually get a real rapid "theft" light flashing when you try to start the car.

Also, a quick test for the starter during a "no crank" is to hold the key in the start position while someone *bumps* the starter (not the solenoid!) with a hammer. I've even seen a few bad battery cables (internal corrosion) that gave the same symptoms.



03-s281 said:
Sometimes after driving my car for awhile it wont start back
up. Its like I'm not pushing the clutch in. The battery if fine and it does not click or anything, it just wont do *****. WTF
Could the starter be getting hot and fouling up? I dont want to take it to the dealer because of my mods. The o/r-x runs right beside the starter and I
know they will blame that.
Can Someone Help????
Click to expand...
 
You must log in or register to reply here.

Similar threads

A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
318
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Hard to start when engine is cold
  • 86_Capri
  • Mar 11, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
32
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
F
1986 mustang no start
  • foxyjamss221
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
335
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 13, 2025
foxyjamss221
F
G
Resolved Please help! (starting issue)
  • Ghoste
  • May 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
478
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 11, 2025
Ghoste
G
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
401
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?