car wont start

The diagrams show what the original factory wiring was supposed to be. They are a starting point in your diagnosis.

Use them to determine what the wire colors and circuits are that you need. Or use them to return the Road Kill wiring you currently have to the
original factory state.

Since it is not practical for me to come and personally troubleshoot your problem, you will need to be the eyes, ears and hands that I would use to analyze the problem. The information is delivered with the assumption that you have a basic understanding of electrical circuits. If you do not, then the repair process is beyond the scope of what can be accomplished over the Internet.

Look carefully at what you have and compare it to the diagrams I posted. There are clues in the work that has been done. Draw out a block diagram of what you have. Your Stangnet profile says you are a drafter/designer, so that shouldn’t be hard for you to do. Post the diagrams as
a GIF file and we will all have the opportunity to see what you are looking at.
 
WOW

that so got blew out of proportion. i ment no harm to anyone especially the guys who are helping me. i was just joking around. and i know yall guys are busy i ment no harm the help i recieved is greatly appreciated and i try to help out as much as possible to and JRICHKER thank you for the diagram i just found the wire the wells box was spliced into and cut it out and reconected the wires and still have spark the wells box is gone. and ROLLINHARD i was just kidding around. so everyone please forgive me and thank you for the help and my GF's car is back running like a top and i just changed the plugs on the notch and its now starting and running then it surges and cuts off so im gonna go through JRICHKERS list and sort it out. once again sorry and thanks guys.

EDIT: for some weird reason he had it wired to pin#16 red/light green.
 
No harm no foul BK. Wrong post at wrong time caught me for me for some reason. At least we didn't turn into message board gangstas.:SNSign: Glad you got it partly solved. Props to BK for being a stand-up guy and taking the high road on this one.
 
just found the wire the wells box was spliced into and cut it out and reconected the wires and still have spark the wells box is gone. my GF's car is back running like a top and i just changed the plugs on the notch and its now starting and running then it surges and cuts off so im gonna go through JRICHKERS list and sort it out.

BK, what ever happened with all this? Did you get your car running good?

How about the GF's car, did the computer end up being OK?

My bad if you already followed up in a different thread that I missed... I'm just curious how it all turned out.

Jeff
 
its all good now

JCHALFAN- i got my notch kicking and the GF's car back right i had to reset the computer and im not exactly sure why the notch crunk up it was weird. and the surging just up and stoped too. i never isolated the problem but the guy before me has hacked the wiring harness all up so i forsee a new wiring harness being installed in the future. but thanks for helping me out and thanks everyone else too.