So am working on my first project and dropped the motor in and everything and I'm hoping to start it up soon. I don't really know anything about carburetors since this is my first time working on one, but some things seem to missing from mine and I was hoping you guys could help me out based on the pics.
Some info about the carb. Its a Holley 4 Barrel with the numbers on the choke tower reading R84011 and the number 2688 underneath that one. and I think its a manual choke because there's a hole in the dash for it but it was removed and I drove it home without one but it cut out a few times on the way home, and a screw seems to be lodged in the choke area?
Am I missing a cable or hookup here because the arm in the photo is just hanging there.
Here's the screw that's been placed in the choke area. I'm not sure if I should take it out or what.(sorry the pic is blurry can take another one if needed)
Some info about the carb. Its a Holley 4 Barrel with the numbers on the choke tower reading R84011 and the number 2688 underneath that one. and I think its a manual choke because there's a hole in the dash for it but it was removed and I drove it home without one but it cut out a few times on the way home, and a screw seems to be lodged in the choke area?
Am I missing a cable or hookup here because the arm in the photo is just hanging there.
Here's the screw that's been placed in the choke area. I'm not sure if I should take it out or what.(sorry the pic is blurry can take another one if needed)