Catback Install help needed

Dusstbuster

I love meat more than anything! I just have a spec

May 31, 2004

1,462

33

64

Moorhead, Minnesota

Jul 3, 2005

#1

• Jul 3, 2005

• #1

OK so this will be like my 400th thread on the subject, sorry guys! But we keep on running into problems. We got the mufflers/tailpipes off and are left with the flange that is part of the stock h-pipe. Lonnngg story short, the nuts/bolts/flanges are all one big rusted piece of metal. It also seems as though the flanges are threaded, at least on the h pipe, because we've dremeld it down til it is flush and it wont pop out....any ideas as to how to get these nuts/bolts off and what to replace them with? We've doused everything with enough rust destroyer/wd40/shotgun blasts as possible and nothing will make them budge. Also, why would you thread the flange?? stupid stupid rust, stupid minnesota, stupid us.

pics...

 

Attachments

• Picture_1760.webp

  49.8 KB · Views: 155
• Picture_1759.webp

  58 KB · Views: 150
• Picture_1758.webp

  45.9 KB · Views: 156

machfelon

New Member

Jun 3, 2005

52

0

0

New Jersey

Jul 3, 2005

#2

• Jul 3, 2005

• #2

WOw thats a lot of rust!!

I would cut all that old stuff out!! Put in a new h pipe and catback !!

 

dollarbill

Member

May 5, 2005

140

0

16

Decatur, IL

Jul 3, 2005

#3

• Jul 3, 2005

• #3

Hell yea, cut that rusted crap off and buy an off road X and some MIL eliminators and be done with it. Sorry but from the pics it looks as though your ride is a Rustang. LOL....

 

posm6s

New Member

Sep 24, 2003

144

0

0

Eddyville, KY

Jul 3, 2005

#4

• Jul 3, 2005

• #4

Damn, thats a lot of rust. Looks like its time to replace the exhaust. Get LT, x-pipe and cat-back and be done with it.

 

Dusstbuster

I love meat more than anything! I just have a spec

May 31, 2004

1,462

33

64

Moorhead, Minnesota

Jul 3, 2005

#5

• Jul 3, 2005

• #5

yeah thats what 9 minnesota winters does to a car. Snow + Salt + Sand + Water = rust factory. We also figured out the problem, one of the previous owners or whoever repaired it after its accident welded the bolt to the flange, so im just saying screw it and taking it into a shop to have them deal with it and fix it. I'll get a midpipe at some point but right now im done for a bit (week or so) from adding things. Every time i try do something that should be easy i run into some gay problem that nobody else seems to have and it gets annoying. So far we've gone through probably 8 of our drill bits, snapped all the bolts except one on the exhaust, bought a dremel, and gotten plenty of nicks and bruises along the way as well. Thanks for the help though, LT and o/r H or X are in the works but right now im not in the financial position to spend $800 or so, and believe me, i will NOT be installing those.

 

CaliLifeStyle

New Member

Jun 9, 2004

625

0

0

Oxnard, CA

Jul 3, 2005

#6

• Jul 3, 2005

• #6

I would have grinded the bolts down flush and then drilled the bolts out. But it looks like its too late to do that since your taking it to a shop.

 

Dusstbuster

I love meat more than anything! I just have a spec

May 31, 2004

1,462

33

64

Moorhead, Minnesota

Jul 3, 2005

#7

• Jul 3, 2005

• #7

CaliLifeStyle said:

I would have grinded the bolts down flush and then drilled the bolts out. But it looks like its too late to do that since your taking it to a shop.

Click to expand...

already tried it, we burnt up/broke about 8 drill bits attemtping it.

 

F

FalconGuy016

New Member

Oct 26, 2004

437

1

0

Northern VA

Jul 3, 2005

#8

• Jul 3, 2005

• #8

Thats damn rusty :O

 

CaliLifeStyle

New Member

Jun 9, 2004

625

0

0

Oxnard, CA

Jul 3, 2005

#9

• Jul 3, 2005

• #9

Dusstbuster said:

already tried it, we burnt up/broke about 8 drill bits attemtping it.

Click to expand...

Plasma cutter?

It's good thing you took it to a shop then.

 

Dusstbuster

I love meat more than anything! I just have a spec

May 31, 2004

1,462

33

64

Moorhead, Minnesota

Jul 3, 2005

#10

• Jul 3, 2005

• #10

we dont have a plasma cutter/welder/anything like that. Havent taken it to the shop yet either, probably wont be able to til tuesday so ill be muffler-less til then

 

Evenflow

yellow snow cone lover

Nov 4, 2004

116

0

16

Mass

Jul 3, 2005

#11

• Jul 3, 2005

• #11

Woooo, im glad I did my catback swap with only 2000 miles on the original catback

 

D

Dragstr05

New Member

Dec 21, 2004

643

1

0

Stafford VA

Jul 3, 2005

#12

• Jul 3, 2005

• #12

Did you ever try heating it with anything? Heat is the best solution to getting something rusted off in one piece. As bad as the rust is in your car, I would have went the heat route almost right away. A small propane tank and an attatchment from the home depot/lowes maybe would have worked, but the process would be low. A torch is the way to go if you have access to one.

 

Dusstbuster

I love meat more than anything! I just have a spec

May 31, 2004

1,462

33

64

Moorhead, Minnesota

Jul 3, 2005

#13

• Jul 3, 2005

• #13

Dragstr05 said:

Did you ever try heating it with anything? Heat is the best solution to getting something rusted off in one piece. As bad as the rust is in your car, I would have went the heat route almost right away. A small propane tank and an attatchment from the home depot/lowes maybe would have worked, but the process would be low. A torch is the way to go if you have access to one.

Click to expand...

the heating wouldnt help with the welds though, we have everything off except for the flange bolts.