• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech

Cheap but good Shocks/Struts

  • Thread starter Thread starter Tru_Blue_104
  • Start date Start date Nov 11, 2004
T

Tru_Blue_104

New Member
Nov 13, 2003
218
0
0
MN
Nov 11, 2004
#1
  • Nov 11, 2004
  • #1
Hey, I need to replace my shocks and struts. I know a lot of you guys on here use the blue tokicos, but those seem a little expensive. Any others that you like? KYB? I cant think of any others, but I just want something that will be better than gabriels and still keep some good stiffness and stability.

THanks guys
 
C

CatmanJJ

Captain Tangnet
20+ Year Stangneter
Feb 5, 2002
4,379
1
68
Maryland
Nov 11, 2004
#2
  • Nov 11, 2004
  • #2
How about Mach 1 (Tokico) shocks n struts, I used those when I lowered my GT...

http://www.fordpartsnetwork.com/03Cobra.htm
 

Lsredy2kstang

Look, I'm special, dammit
Nov 29, 1999
2,543
5
0
Woodstcock, Georgia
Nov 11, 2004
#3
  • Nov 11, 2004
  • #3
Yes, the Tokico's off the Mach are good. But yes, FORD PART NETWORK has a deal on them but check out www.gefracing.com a buddy of mine stopped in picked up the shocks for only 29 bucks each with taxes!
 
T

Tru_Blue_104

New Member
Nov 13, 2003
218
0
0
MN
Nov 12, 2004
#4
  • Nov 12, 2004
  • #4
CatmanJJ said:
How about Mach 1 (Tokico) shocks n struts, I used those when I lowered my GT...

http://www.fordpartsnetwork.com/03Cobra.htm
Click to expand...
Do I have to lower my car though? Stupid question, but I have to ask. And those will fit with no modification on a 94 V6?
 

Lsredy2kstang

Look, I'm special, dammit
Nov 29, 1999
2,543
5
0
Woodstcock, Georgia
Nov 12, 2004
#5
  • Nov 12, 2004
  • #5
No you do not have to lower your car, and yes they will fit no problem. The 94+ use the same frame and they will be a direct bolt in.
 
S

SpectorV

Founding Member
Sep 3, 2000
1,872
0
36
Florence, Alabama
Nov 12, 2004
#6
  • Nov 12, 2004
  • #6
the mach 1 struts/shocks are designed for a lightly lower car but only like 3/4 of an inch... they will work perfectly fine on your stock ride height car. you should definatly consider getting some ford C springs for 100 bucks and drop the car 1.2 inches all around while you are at it. its a major change and the handeling with the shocks will be a ton better.

the shocks/struts should run you 200 bucks.
 
T

Tru_Blue_104

New Member
Nov 13, 2003
218
0
0
MN
Nov 12, 2004
#7
  • Nov 12, 2004
  • #7
SpectorV said:
the mach 1 struts/shocks are designed for a lightly lower car but only like 3/4 of an inch... they will work perfectly fine on your stock ride height car. you should definatly consider getting some ford C springs for 100 bucks and drop the car 1.2 inches all around while you are at it. its a major change and the handeling with the shocks will be a ton better.

the shocks/struts should run you 200 bucks.
Click to expand...
I've been looking around for these shocks/struts and cant find anywhere where they are gonna be 200 for a complete set up. The link above adds up to about 260, but if you know of a better place, please let me know. Oh, and where can I find these C Springs, Ive never heard of them before.
 

Lsredy2kstang

Look, I'm special, dammit
Nov 29, 1999
2,543
5
0
Woodstcock, Georgia
Nov 12, 2004
#8
  • Nov 12, 2004
  • #8
www.fordpartsnetwork.com have them for I belive 179 for the set. Plus shipping should not be that much.

C springs are for the 79+ Mustangs adn can be found at any Ford Dealer. They are not as rough or slammed as an aftermarket.
 
T

Tru_Blue_104

New Member
Nov 13, 2003
218
0
0
MN
Nov 12, 2004
#9
  • Nov 12, 2004
  • #9
OK, I'm for sure gonna get the Mach 1 shocks/struts. But heres my concern about the lowering springs: I live in Minnesota and drive the car for some of the winter season. will lowering the car with the C springs be bad for driving in the snow?
 

doc4444

Founding Member
Jul 11, 2002
234
0
0
Nov 12, 2004
#10
  • Nov 12, 2004
  • #10
SpectorV said:
the mach 1 struts/shocks are designed for a lightly lower car but only like 3/4 of an inch... they will work perfectly fine on your stock ride height car. you should definatly consider getting some ford C springs for 100 bucks and drop the car 1.2 inches all around while you are at it. its a major change and the handeling with the shocks will be a ton better.

the shocks/struts should run you 200 bucks.
Click to expand...

I apologize in advance for taking over this thread but it seems pertinent.

Please forgive me for sounding naive but are you saying that the FMS C Springs CAN be used with the Mach 1 strut/shock combo? Tru_Blue_104 had stated earlier that these were made for "lightly lowered cars but only like 3/4" With this in mind will these springs work well with these struts/shocks or will the struts shocks fail prematurely due to the increased drop? Thank you for any responses, I just want to make sure that I have all the correct information before I drop 300-400 dollars on a spring/strut/shock combo that I may 1) have to replace early or 2) may not like. For anyone that has this combo the Mach 1 strut/shock and FMS C Springs. Do you like the ride? Is it comfortable or "sporty" (read- feel every bump and "BANG" when I go over large potholes)? Thanks in advance to one and all for your help.

Tru_Blue_104:

The only thing that I can see that would be problematic for snow would be clearance issues. You know height of "packed snow". If you have good snow tires and adequate clearance for snow conditions I don't see why lowering your car would be problematic. With that being said I've only been through 3 winters out here in Washington so I may not be the best person to talk to you about driving in the snow. Good Luck.
 
S

SpectorV

Founding Member
Sep 3, 2000
1,872
0
36
Florence, Alabama
Nov 12, 2004
#11
  • Nov 12, 2004
  • #11
they will work fine with the fms c springs, the drop is very minimal i am riding on the stock struts and shocks going on 3 years with out an issue yet so you wont have to worry about a super fast wearing out of the struts/shocks.
 
You must log in or register to reply here.

Similar threads

Suspension Quad shocks
  • keel
  • May 20, 2026
  • Fox 5.0 Mustang Tech
Replies
18
Views
420
Fox 5.0 Mustang Tech May 26, 2026
Mustang5L5
Fox Suspensión Noise
  • PonyGTrider
  • Nov 24, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
403
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 8, 2026
PonyGTrider
N
Fox Street Suspension Build Advice
  • NYFox
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
328
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 28, 2026
Noobz347
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
222
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
S
Car shakes when taking off help???
  • STANKYstangs
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
343
1996 - 2004 SN95 Mustang -General/Talk- May 27, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 V6 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?