Cheapest Route to 300rwhp

super302 · Jan 2, 2005

I think this would be a good sticky , anyways, list a few of the cheapest routes to get the sought-after 300rwhp. This will be a good reference to alot of beggining modders and everyone else.
Don't foget to add the things usually forgot like bigger fuel injectors, etc.

-Patrick

GTPhreak · Jan 2, 2005

HISSIN50 · Jan 2, 2005

GTP hit it on the head.

super302 · Jan 2, 2005

....besides NAWSSSSSSS

DFG 5OH · Jan 2, 2005

explorer 5.0

wytstang · Jan 2, 2005

matthiasj said:
explorer 5.0

You mean the explorer gt40p heads, and explorer intake. The block them selves are the same.

KM 94 GT · Jan 2, 2005

Central Coast Mustangs High Compression Longblock
340hp $2,895

DFG 5OH · Jan 2, 2005

wytstang said:
You mean the explorer gt40p heads, and explorer intake. The block them selves are the same.

thats what i meant but i thought the crank was different...

SWYZ721 · Jan 2, 2005

Those are some sexy NOS bottles!

wytstang · Jan 2, 2005

matthiasj said:
thats what i meant but i thought the crank was different...

I would assume they are the same to be a 5.0 the bore & stroke must be the same or close enough to round up or down.

OrangeMustangGt · Jan 2, 2005

yes, get an explorer motor, and a good cam. It may not be exactly 300, but with a good tune it will be damn close. one guy has run a 12.4 with one in his vert, forgot his name.

donjohn · Jan 2, 2005

you talking about redSN95vert aka allmotor95 aka willie? b/c he's down to an 11.9

this is his combo as listed in his sig:

95 GT Convertible
98 Explorer Engine(5.0)
Engine mods:
Twisted Wedges(unported)
RPM II Intake, 42# Inj.
Crower Cam #514

HoofnIt · Jan 2, 2005

There is no such thing as a 'CHEAP' route to 300 rwhp. Unless of course you consider at $4-5 grand as cheap! I would say the least expensive option is to purchase a used supercharger.

stang2841 · Jan 2, 2005

matters how good you are mechanically..

It can be made real cheap if you do the labor yourself..

my combo I'm doing now should be able to hit it and I've payed less then 1500 for all of the H/C/I

GT40p's milled to 10:5 + compression ratio
sent through a CNC machine, and hand ported exhaust side.. 700 dollars for the whole deal..
Typhoon intake (slightly ported lower) to clean up the lowers done by myself.. with a edelbrock 65mmthrottlebody..
B cam with 1.7 rockers.. got that whole set up used for 250 bucks..

theres odds and ends that I'm sure will add up as well but so far its a nice budget build.. keep the lift around .500 with the P heads and get everything else to support it and you got yourself a stout combo.. for less then half as much as a custom combo..

Hoping to pull 300rwhp

final5-0 · Jan 2, 2005

stang2841 said:
matters how good you are mechanically..

It can be made real cheap if you do the labor yourself..

my combo I'm doing now should be able to hit it and I've payed less then 1500 for all of the H/C/I

GT40p's milled to 10:5 + compression ratio
sent through a CNC machine, and hand ported exhaust side.. 700 dollars for the whole deal..
Typhoon intake (slightly ported lower) to clean up the lowers done by myself.. with a edelbrock 65mmthrottlebody..
B cam with 1.7 rockers.. got that whole set up used for 250 bucks..

theres odds and ends that I'm sure will add up as well but so far its a nice budget build.. keep the lift around .500 with the P heads and get everything else to support it and you got yourself a stout combo.. for less then half as much as a custom combo..

Hoping to pull 300rwhp

You make a lot of valid points and I see where you are coming from

An important thing to consider when putting a plan in place to make low budget HP is matched parts for a combo that work well together. You can find some really good deals on used parts but sometimes you just have to be patient about it.

One of the greatest ways to save money comes from having the ability to do the work yourself.

Later
Grady

Cheapest Route to 300rwhp

super302

I'd do anything for free Bapples

GTPhreak

HISSIN50

"How long does it take to get help in here?

super302

I'd do anything for free Bapples

DFG 5OH

Active Member

wytstang

Mustang Master

KM 94 GT

New Member

DFG 5OH

Active Member

SWYZ721

Member

wytstang

Mustang Master

OrangeMustangGt

donjohn

New Member

HoofnIt

stang2841

New Member

final5-0

Mustang Master

Similar threads

Cheapest Route to 300rwhp

I'd do anything for free Bapples

"How long does it take to get help in here?

I'd do anything for free Bapples

Active Member

Mustang Master

New Member

Active Member

Member

Mustang Master

New Member

New Member

Mustang Master

Similar threads

Privacy & Transparency

Privacy & Transparency