Check Engine Light came on....HELP!!!

SRT Handz

I tripped & fell down and cut myself & got blood

Oct 10, 2004

941

23

19

La Mirada, CA

Mar 28, 2006

#1

• Mar 28, 2006

• #1

So i am driving home from work at and its raining pretty hard. there was alot of water on the road and drove though some which i know got the whole underside of my car wet.

well i keep driving and the check engine light came on. I got home and there was white smoke comming outta the tail pipes.

I check the codes and here they were.

P0136 - O2 bank 1
P0156 - O2 Bank 2

I tried clearing it with my Diablo and it wouldnt clear

Can someone please tell me what these are and whats wrong and if there is any way i can fix it myself

 

SRT Handz

I tripped & fell down and cut myself & got blood

Oct 10, 2004

941

23

19

La Mirada, CA

Mar 28, 2006

#2

• Mar 28, 2006

• #2

Someone must know!!!

 

B

Boss75

New Member

May 6, 2004

16

0

0

Lubbock, TX

Mar 28, 2006

#3

• Mar 28, 2006

• #3

I don't know what the codes specifically are, but if you call a place like Autozone or something they should be able to look it up for ya.

 

R

Red2000GT

Founding Member

Sep 10, 2000

2,450

0

46

Regina,Sask.Canada

Mar 28, 2006

#4

• Mar 28, 2006

• #4

Sounds like you drenched your o2 sensors and they weren't responding for a while. Let the car completely dry out then run the codes tomorrow and clear them. If the car runs funny and the codes won't clear then you've damaged one or both of the sensors from too much water. I've never heard of anyone doing that but it is possible.

 

tomustang

Psychotic Member

Founding Member

Jun 8, 2000

3,434

2

78

McLean Hospital

Mar 28, 2006

#5

• Mar 28, 2006

• #5

you have a diablosport, that's the problem

 

SRT Handz

I tripped & fell down and cut myself & got blood

Oct 10, 2004

941

23

19

La Mirada, CA

Mar 28, 2006

#6

• Mar 28, 2006

• #6

Well, i have no cats with MIL eliminators...i turned off the rear 02's will the diablo and it went away......think i shorted out the senors or shorted out the MILs?

 

SRT Handz

I tripped & fell down and cut myself & got blood

Oct 10, 2004

941

23

19

La Mirada, CA

Mar 29, 2006

#7

• Mar 29, 2006

• #7

and what about the white smoke?

 

Mike97gt

it doe snot

Founding Member

Jan 26, 1999

10,633

7

89

the people's republic of massachusetts

Mar 29, 2006

#8

• Mar 29, 2006

• #8

those codes are circuit faults for both cat monitors. ( rear 02 sensors)


Does the car run fine? are you sure it's white smoke and not steam?

 

SRT Handz

I tripped & fell down and cut myself & got blood

Oct 10, 2004

941

23

19

La Mirada, CA

Mar 29, 2006

#9

• Mar 29, 2006

• #9

svttech76 said:

those codes are circuit faults for both cat monitors. ( rear 02 sensors)


Does the car run fine? are you sure it's white smoke and not steam?

Click to expand...

but what does circuit fault mean? does in mean the sensors are bad or that the computer is reading no cats?

 

Mike97gt

it doe snot

Founding Member

Jan 26, 1999

10,633

7

89

the people's republic of massachusetts

Mar 29, 2006

#10

• Mar 29, 2006

• #10

SRT Handz said:

but what does circuit fault mean? does in mean the sensors are bad or that the computer is reading no cats?

Click to expand...

it means either the wiring the pcm or the sensor is bad. a circuit fault means exactly what it says. the electrical cicuit from the sensor to the pcm is damaged.

what is causing this code? well your going to have to get under your car and do some tests.

 

Thundermouse

Member

Sep 17, 2003

168

3

18

Decatur, GA

Mar 29, 2006

#11

• Mar 29, 2006

• #11

Don't get all excited just yet. This sounds like something that happened to me. When I replaced my H-pipe with an MRT H, I didn't notice that the new location for the O2 sensor was right below the A/C drain spout. I was driving one day and the my CEL came on. The dealer told me I had shorted out the O2 sensor and tried to sell me a new one. I said no, and just let the thing dry for a couple days. The light went off on its own and then I shield the sensor from the drain line. No problems since.

I think you just got the sensors good and wet. Let them dry for a few days before you do anything else.

 

01GTSTANGER

Member

Feb 19, 2006

100

0

17

Pasadena, CA

Mar 29, 2006

#12

• Mar 29, 2006

• #12

P0153 is the Passenger side front o2 sensor. I had the same thing on mine and I replaced it and that stupid light went away. Also make sure its not loose that sometimes can cause a problem. Dont know much about the other code. Good luck man