• Community Forums
  • The Welcome Wagon

Check Engine Light On 2004 Stang Gt With Low Milage!!

  • Thread starter Thread starter Debrajean70
  • Start date Start date Aug 19, 2016
  • Tags Tags
    2004 mustang gt check engine light low miles oil change radiator tranny fluid

Debrajean70

Member
Aug 19, 2016
11
2
13
Long Island, NY, USA
Aug 19, 2016
#1
  • Aug 19, 2016
  • #1
I am new to this site. Yet in my minimal searching around, love it. my dream stang is, Of course, The Shelby. Thus why I named my pitbull after the Shelby!!

My baby is riding rough and tonight the check engine light came on,8 /19/16. I KNOW something is very wrong....she has been riding rough for about 3 weeks, I ignored like a jerk cause my hubby in hospital on a respirator. Now to fix her. I am afraid to drive her at all, cause I read on Ford dot com, that this could be serious. Where do I start??? Do those code scanner things work on a 2004? It is night so I filled the with gas and drove straight home into her garage. Tomorrow, I will check the oil and the battery. I have been having issues with the battery..sometimes needing to jump her. Dec, 2015, was her last oil change. At that time. They said I need to bleed out all fluids and replace. To the tune of $400 bucks....I wanted to do myself. They also said the tranny fluid was black, it should be red. Due to my hubby circumstance, i need to fix her, fast and for not too much $$. Please advise as to what to do first. Ummm, does anyone know of those, roadside massistance people!e have those scanners?? I really do not want to drive her....don't want to blow her engine or tranny.... Please help!!
 
Last edited: Aug 19, 2016

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Aug 20, 2016
#2
  • Aug 20, 2016
  • #2
Hi Debra (correct on the name?), welcome to Stangnet.

It's good to see you like to work on your mustang yourself.

You can go to most auto parts stores and they'll have an OBD II scanner to plug into your car to see what's throwing the code. Easy peasy. When you have a little extra cash, it wouldn't hurt for you to get one from SCT, or any of the other companies out there. Those will help to tune your car as well in accordance with the way you drive.

Transmission fluid will maintain that red dye color for a bit of time, but it will start to change though. What you should do is to pull the dipstick out and sniff it. If the fluid smells burned, that's not good. Color, in of itself won't tell you much.

Most roadside help companies will have a scanner btw.

Check your oil level, coolant level and transmission fluid level. If they are in the good range, you'll probably be fine to get to the Autozone, Oriellys or whomever to get the code read.

Ford.com is like going to one of the medical.com places. While you can get the truth from them, sometimes it might over diagnose you.

A rough running car sometimes can be just a little thing.

I'm sorry to here about your husband and will hope for you that he will be ok.

When you get time, go to the subforum for '96-'04 mustangs. You'll get lots of help there from members with your style vehicle. Include pictures of your mustang when you start a new thread there. We all love pictures.
 

Debrajean70

Member
Aug 19, 2016
11
2
13
Long Island, NY, USA
Aug 20, 2016
#3
  • Aug 20, 2016
  • #3
Davedacarpainter said:
Hi Debra (correct on the name?), welcome to Stangnet.

It's good to see you like to work on your mustang yourself.

You can go to most auto parts stores and they'll have an OBD II scanner to plug into your car to see what's throwing the code. Easy peasy. When you have a little extra cash, it wouldn't hurt for you to get one from SCT, or any of the other companies out there. Those will help to tune your car as well in accordance with the way you drive.

Transmission fluid will maintain that red dye color for a bit of time, but it will start to change though. What you should do is to pull the dipstick out and sniff it. If the fluid smells burned, that's not good. Color, in of itself won't tell you much.

Most roadside help companies will have a scanner btw.

Check your oil level, coolant level and transmission fluid level. If they are in the good range, you'll probably be fine to get to the Autozone, Oriellys or whomever to get the code read.

Ford.com is like going to one of the medical.com places. While you can get the truth from them, sometimes it might over diagnose you.

A rough running car sometimes can be just a little thing.

I'm sorry to here about your husband and will hope for you that he will be ok.

When you get time, go to the subforum for '96-'04 mustangs. You'll get lots of help there from members with your style vehicle. Include pictures of your mustang when you start a new thread there. We all love pictures.
Click to expand...
Thank you so much!! Yes I def want to buy one of those code scanners...but right now is not the right time due to hubby condition. I did do some research and found 5 reasons why the service engine light could be on. So far the oil is good, the gas cap good, ummm not to sound dumb but I cannot find the tranny stick....will investigate. I did have to jump her this morning to get her out of the garage.... So maybe it isnthe battery??? I did have to buy a new battery about a year and a half ago...but the cables or the battery terminals ALWAYS have corrosion. Always have it cleaned...I do not see any right now. But I did have to jump her. Hubby in surgery so I have no choice but to drive her about 3 miles to hospital THEN about 5 miles to AutoZone for code reading? Pray for my girl. I will freak if something happens go her! Will post pics of her later and tell you all the sentimental story about her. Any advise. Now???
 
Reactions: Davedacarpainter

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Aug 20, 2016
#4
  • Aug 20, 2016
  • #4
Debrajean70 said:
Thank you so much!! Yes I def want to buy one of those code scanners...but right now is not the right time due to hubby condition. I did do some research and found 5 reasons why the service engine light could be on. So far the oil is good, the gas cap good, ummm not to sound dumb but I cannot find the tranny stick....will investigate. I did have to jump her this morning to get her out of the garage.... So maybe it isnthe battery??? I did have to buy a new battery about a year and a half ago...but the cables or the battery terminals ALWAYS have corrosion. Always have it cleaned...I do not see any right now. But I did have to jump her. Hubby in surgery so I have no choice but to drive her about 3 miles to hospital THEN about 5 miles to AutoZone for code reading? Pray for my girl. I will freak if something happens go her! Will post pics of her later and tell you all the sentimental story about her. Any advise. Now???
Click to expand...
I've bought batteries before that went bad, but luckily was soon enough they had a warranty covering them.

The battery charge might also depend on the useage of your car. My wife worked less than a mile from our house for awhile. The alternator didn't have enough time to recharge the battery from starting it.

Get the codes read from your car before you do anything else. You will be going off of luck otherwise on fixing it. You might get lucky the first time and fix it, or it could be a couple hundred dollars down the road before you come up with the real culprit.

I would suggest buying a Chilton's manual for your year of mustang as well. It won't have everything, but it does have a lot of good info.
 

Debrajean70

Member
Aug 19, 2016
11
2
13
Long Island, NY, USA
Sep 7, 2016
#5
  • Sep 7, 2016
  • #5
Hey sorry it took me so long to reply, hubby was moved to a lung rehab...anyway it wound up being the cam something sensor...bought the part for $12 bucks at AutoZone...coat me $80 for garage to put in, took 3 mins... Now I am told I am low on tranny fluid, she still running rough..so I am off to get her tranny fluid and an funnel so I can put it in.... I promise to post Monica soon. Thanks again xo
 

Debrajean70

Member
Aug 19, 2016
11
2
13
Long Island, NY, USA
Sep 10, 2016
#6
  • Sep 10, 2016
  • #6
Debrajean70 said:
Hey sorry it took me so long to reply, hubby was moved to a lung rehab...anyway it wound up being the cam something sensor...bought the part for $12 bucks at AutoZone...coat me $80 for garage to put in, took 3 mins... Now I am told I am low on tranny fluid, she still running rough..so I am off to get her tranny fluid and an funnel so I can put it in.... I promise to post Monica soon. Thanks again xo
Click to expand...
It was the CAM POSITION SENSOR*.
 
You must log in or register to reply here.

Similar threads

Electrical Issues with my 2006 mustang gt
  • VerneVdV
  • May 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
90
2005 - 2009 Specific Tech May 22, 2026
VerneVdV
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
2
Views
136
2005 - 2009 Specific Tech Jun 29, 2026
ejscarfo
E
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
351
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
A
Rough idle - cylinder 1 and 6 misfire HELP
  • austindavies935
  • Jul 24, 2025
  • SN95 4.6L Mustang Tech
Replies
12
Views
717
SN95 4.6L Mustang Tech Jul 24, 2025
gkomo
SURGING IDLE / NO IDLE CHECKLIST FOR 1999–2004 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
904
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
Share:
Bluesky Email Share Link
  • Community Forums
  • The Welcome Wagon
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?