CHECK OUT MY FRIENDS NEW TOY!!!!!!!!

#21
tunedin302 said:
Ummm ..... Perhaps I didn't write it as I intended to convey it. I wasn't knocking the parts or money that was spent on the car. It seems like you have some high quality parts in there. I was referring to the tach wire that ran from the passenger side across the front of the dash, the wiring for the a-pillar, and what appeared to be an amp laying in the back seat area. Since it's a build picture, then it makes sense since I thought it was possibly a completed photo. Look, either way, congrats on the new car and continued build of your GF car. Someday i hope to have powerful stang too :shrug:
Click to expand...


Looks like an amp?? WOW you need to get those eyes checked. Thats definatley an intercooler there bud:nice:

and you call yourself car gods:jaw:
 
#23
2004mach1 said:
thanks for the compliments guys. i just got it and wanted to take a pic. believe me it has shine on it now.
cant really say what kinda deal i got but it was a good one! :nice:
heres our other cars. :D
well guys i got a crazy deal i couldnt turn down.
so here is what i got :D :D
its a 1997 mustang cobra. 130 000 on it. it needs some TLC but for only having it a couple days its ALOT better then what i got it like.
mods.
centerforce dual friction clutch
x pipe and catback exhaust
B&M short throw shifter
and a SUPER dirty K&N lol
its been lowered as well
and some 18's
other then that stock for now.
( click for bigger pics )







to join the other 2 stangs we have here. which are..

my 04 mach 1 competition orange. 1 of 3 in the province of ontario.
834.2 kms on it. all stock for now. with the exception of the C&L cold air / mass air kit, and a couple pieces of chrome under the hood.

and my girlfriends car. its a 00 GT that came to us last year lowered and with y2k cobras. ( first pics )
after 1 summer we did 3 tv's, full stereo, short throw, and an x pipe. i spun 4 bearings so it came off the road and we decided to build.
sent the motor to ROUSH racing and let them have it. came back as a FULLY forged 5.1 L stroker, with comp 270 cams, everything was replaced only the block and timing cover.
the motor came back as a balanced and blueprinted long block that she and i finished the assembly and painted followed by dropping it in.
anyways now it sits with a saleen m90 blower on the top waiting to be changed for a kennebell. we also did all the suspension, brakes, and she wanted the taillights so those were swapped as well as the spoiler removed. Then was time to install the ROUSH front bumper and weld wheels ( slicks and skinnies ). We added the gauges and seats and thats it for now. by next summer it will have a fresh coat of paint and a T56 hidding in it.







http://www.photodump.com/viewer/04mach1/IMGP1206.html
Click to expand...



:jaw:

and the warrenty for the 2000 gt just went out the window lol
 
#25
2004mach1 said:
lol.. warranty thats about as big of a joke as some kid in a honda that pulls up and asks to run.....
warranties never cover what you need them too :(
Click to expand...

mhm. on question.

when you spun 4 of them what were you doing and was that the stock motor at the time? :shrug:
 
#26
yes it was a stock motor....
well i was leaving work. and because it was the last day we were gunna drive it before winter all the guys wouldnt leave me alone... so i fired her up let her idle for about 15 seconds then pulled out easy... got to the end of the lot and let her hang...... she went like mad. i was bangin gears sideways. and once i let out i heard a terrible knocking...
so i pulled over and tried to hear where it was comming from. once i found it was the bottom end i called and towed it home. ripped her down and that was the damage.
 
#27
2004mach1 said:
yes it was a stock motor....
well i was leaving work. and because it was the last day we were gunna drive it before winter all the guys wouldnt leave me alone... so i fired her up let her idle for about 15 seconds then pulled out easy... got to the end of the lot and let her hang...... she went like mad. i was bangin gears sideways. and once i let out i heard a terrible knocking...
so i pulled over and tried to hear where it was comming from. once i found it was the bottom end i called and towed it home. ripped her down and that was the damage.
Click to expand...


sounds like your a big idiot that shows off, hope I dont see that cobra in a ditch somewhere.
 
#28
S&B said:
sounds like your a big idiot that shows off, hope I dont see that cobra in a ditch somewhere.
Click to expand...


:lol:

2004mach and deegee stop acting tough we have all been here for years and we like to have a good time, stop with this attitude your acting like 2 year olds. all tunedin said was it "looked" like,, not it was an amp. so knock it off
 
#33
1990Coupe said:
:lol:

2004mach and deegee stop acting tough we have all been here for years and we like to have a good time, stop with this attitude your acting like 2 year olds. all tunedin said was it "looked" like,, not it was an amp. so knock it off
Click to expand...


AWWW muffin, somebody upset. I dont care how long you guys been around, in my eyes you guys are still #$@$!!!:rlaugh:
 
#39
2004mach1 said:
yes it was a stock motor....
well i was leaving work. and because it was the last day we were gunna drive it before winter all the guys wouldnt leave me alone... so i fired her up let her idle for about 15 seconds then pulled out easy... got to the end of the lot and let her hang...... she went like mad. i was bangin gears sideways. and once i let out i heard a terrible knocking...
so i pulled over and tried to hear where it was comming from. once i found it was the bottom end i called and towed it home. ripped her down and that was the damage.
Click to expand...


peer presser. its a bitch :p
 
You must log in or register to reply here.

Similar threads

91AOD5.0LX
Removing speedo cable from the VSS
Replies
27
Views
850
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
91AOD5.0LX
91AOD5.0LX
R
Rcapri - 1980 Capri, bought new by inlaws
Replies
19
Views
879
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
manicmechanic007
manicmechanic007
B
Where to go from here on my build…
Replies
8
Views
174
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
AeroCoupe
AeroCoupe
M
Too much for me to repair in my current housing situation
Replies
8
Views
283
The Welcome Wagon
Noobz347
Noobz347
mach1
SOLD BringaTrailer - 1993 SVT Cobra - Original Owner - 4,737 miles
Replies
1
Views
715
Fox Body Mustangs For Sale (1979-93)
mach1
mach1
Top Bottom
Back
Forums
Menu