• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

check out my notch, opinions welcome

  • Thread starter Thread starter 1991notchbackLX
  • Start date Start date Jan 8, 2008

1991notchbackLX

Active Member
Dec 25, 2007
1,483
47
48
New York
Jan 8, 2008
#1
  • Jan 8, 2008
  • #1
hey, i've made a few posts recently and i wanted to let you guys see what i've been working on, with your help and advice, of course

1991 LX Notch 5.0 HO... amazing deal, i bought it bone stock last month with 47k original documented miles, California car, no rust whatsoever, interior smells new, i was told by amost everyone i know "DO NOT MOD THE CAR, SELL IT ON eBAY" but what fun is that???

so far i've done BBK underdrive pulleys, BBK cold air intake, BBK short throw shifter, BBK longtube headers and MAC prochamber... this month I'll be doing a BBK 70mm throttle body, 76 mm C&L MAF, 3:73 gears (with speedo calibration gear), and 24 lb injectors





coming soon, heads/cam/intake, aluminum driveshaft with loop, strut tower brace and subframe connectors, dyno tune, 4 inch cowl, and flowmaster 10 series dumps

thanks for looking let me know what you think!
 

Attachments

  • 1000914lg9.th.webp
    2.8 KB · Views: 116
  • 1000917cp2.th.webp
    2.8 KB · Views: 120
I

iwashmycar

20+ Year Stangneter
Apr 7, 2004
1,236
1
39
Columbus, Ohio
Jan 8, 2008
#2
  • Jan 8, 2008
  • #2
looks great.... 5-lug with brakes would be nice....as always lol

and a 4" cowls gonna be overkill for sure.....can't you fit it under a 3!?

....aaaand leave the tails!!! dont dump it!!
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Jan 8, 2008
#3
  • Jan 8, 2008
  • #3
put it on 22's and get a dr.pepper decal made for it. lol j/k
 

Fett

New Member
Nov 2, 2004
766
6
0
Jan 8, 2008
#4
  • Jan 8, 2008
  • #4
Yea, if you do dump it....do NOT go with Dronemas....er, Flowmasters. Go with a "quieter" high flowing, NON chambered muffler. Flowmasters dumped sound horrible...in my opinion. Dynomax Turboflows sound good dumped.
 

1991GreeNLX

New Member
Jul 2, 2004
129
0
0
Houston TX
Jan 8, 2008
#5
  • Jan 8, 2008
  • #5
i would rather go with a cobra hood instead of a 4 inch but that me i would leave the stainless tail pipes and get some dynomax race bullet muffs i had em on my LX hatch and loved them but then again it is your car word to the wise don't let anyone drive it my BRO TOTTTTTTTTLED mine
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Jan 9, 2008
#6
  • Jan 9, 2008
  • #6
4-inch hood = unless you've got a reason to have it. Remember, you asked for opinions. Mine is that a coupe doesn't need body mods.

It's a really sweet car. If it was mine, I'd lower it, leave the tails and find some nicer wheels.
 

leroy93lx

Member
Jun 24, 2007
29
2
9
Indiana
Jan 9, 2008
#7
  • Jan 9, 2008
  • #7
It would definately look much better sitting low! 1.5 cowl would look much cleaner than 3 or 4 inch and nice stainless tailpipes ftw! I like the car though. Looks nice and straight.
 

Trbofox

Member
Oct 26, 2004
227
18
19
Erie,Pa.
Jan 9, 2008
#8
  • Jan 9, 2008
  • #8
Gotta love a notch, do it up, and have fun with it.
 
M

mavmavv

New Member
Nov 21, 2007
185
0
0
Jan 9, 2008
#9
  • Jan 9, 2008
  • #9
Small cowl at max. Dont rice it up. It sits too nice as is!
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jan 9, 2008
#10
  • Jan 9, 2008
  • #10
Very nice...love that color. Sits a bit high though.
 

2000xp8

SN Certified Technician
Aug 8, 2003
8,029
1,620
194
NJ
Jan 9, 2008
#11
  • Jan 9, 2008
  • #11
It's a good looking car the way it sits.
A 4 inch cowl hood is going to be way overkill, leave the stock hood.
And certainly don't dump the exhaust, part of the beauty of an lx is the exhaust pipes, people have been trying to duplicate the look on other cars for years, and they just can't.
On a notch, less is more.
 

1991notchbackLX

Active Member
Dec 25, 2007
1,483
47
48
New York
Jan 9, 2008
#12
  • Jan 9, 2008
  • #12
hahah i knew in posting this that i was gonna get the most heat for the 4" cowl and the dumps... those two things are still very up in the air, i have 40 series flows on the car now and i'm most definitely doing the motor and suspension work before i do the hood or the exhaust, but thanks for all the opinions guys! anybody else that comes across this post feel free to tell me what you think!!
 

faststang90

10 Year Member
Nov 5, 2007
522
16
49
baytown texas
Jan 9, 2008
#13
  • Jan 9, 2008
  • #13
coupes

i like coupes they are the best of the mustangs
 

RARE NOTCH

Member
Nov 3, 2007
73
0
6
Ohio
Jan 10, 2008
#14
  • Jan 10, 2008
  • #14
Nice notch. almost as nice as mine.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jan 10, 2008
#15
  • Jan 10, 2008
  • #15
RARE NOTCH said:
Nice notch. almost as nice as mine.
Click to expand...


Damn, you're a modest one aren't ya?



Mine's 1 of 9....beat that




JFWY!
 

LiquidGT

Member
Oct 8, 2007
368
0
16
Near STL hell
Jan 10, 2008
#16
  • Jan 10, 2008
  • #16
Personally I hate cowl hoods on foxes, I only like the 1.5 in cowl on a fox. Get a catback with 3 in tips, and lower it with 18 in wheels. Correct me if I'm wrong but I heard exhaust gases corrode the underbody under time with dumps, I wouldnt want to do that to a pristine 5.0 like that.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jan 10, 2008
#17
  • Jan 10, 2008
  • #17
LiquidGT said:
Personally I hate cowl hoods on foxes, I only like the 1.5 in cowl on a fox. Get a catback with 3 in tips, and lower it with 18 in wheels. Correct me if I'm wrong but I heard exhaust gases corrode the underbody under time with dumps, I wouldnt want to do that to a pristine 5.0 like that.
Click to expand...



I dunno about eroding but it does make a nasty black mess on the rear end....something i sure wouldn't want with a low mileage car.
 

faststang90

10 Year Member
Nov 5, 2007
522
16
49
baytown texas
Jan 10, 2008
#18
  • Jan 10, 2008
  • #18
my hood

when u have a 547 bbf u need more than 1.5 hood . i put 1in k member spacer and the motor is still hard to get in the car.
 

rock4451

20+ Year Stangneter
Nov 30, 2004
12
2
29
New Baden, IL
Jun 17, 2009
#19
  • Jun 17, 2009
  • #19
faststang90 faststang90 is offline
Official Member

Posts: 153
Join Date: November 2007
Report Post
coupes - 01-09-08, 07:02 PM
i like coupes they are the best of the mustangs
Click to expand...

+1 for the coupes. nice ride. no cowl though man
 

rbonella

Member
Dec 15, 2008
409
6
19
@ home
Jun 17, 2009
#20
  • Jun 17, 2009
  • #20
I love the coupes. I had an old highway patrol car back in highschool. I'd like to get another coupe. Looks good!
 
You must log in or register to reply here.

Similar threads

SN95 Desktop 363 Engine Combination - Looking for input
  • WhiteCobra95
  • Sep 8, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 6, 2025
Habu135
A
1991 5.0 with HCI - started car, running for a few minutes, started pushing coolant into the overflow tank and then puking out from there. I'm lost
  • AmericanMuscle4.6GT
  • Oct 16, 2022
  • Fox 5.0 Mustang Tech
Replies
6
Views
4K
Fox 5.0 Mustang Tech Nov 30, 2022
CAMTWO1070
F
1993 Cobra flooding
  • FireFoxCobra_SVT93
  • May 20, 2022
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
5K
Fox 5.0 Mustang Tech Mar 11, 2023
nickyb
Engine A few issues with my new 88 Foxbody that i couldnt find definitive answers to....
  • AydenTv
  • Mar 6, 2022
  • Fox 5.0 Mustang Tech
Replies
6
Views
2K
Fox 5.0 Mustang Tech May 23, 2022
7991LXnSHO
Progress Thread Dirty Water Racing 89 Notch Project
  • ShedBuiltMS
  • Sep 29, 2020
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
64
Views
13K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 28, 2021
Flyboy60
F
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?