• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

check this deal out...

  • Thread starter Thread starter flstang65
  • Start date Start date Aug 22, 2008

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
Aug 22, 2008
#1
  • Aug 22, 2008
  • #1
You guys probably remember a week or 2 ago I posted about the new clutch set up I am getting. I decided to get some gears as well. Instead of getting the gears and install kit from Late Model Restoration for like $270, I have a buddy that sells used Mustang parts here in Orlando. He called me out of the blue one day and asked if was interested in some gears. After a trip to his shop, I snagged a complete rear end with a rebuilt Trac-Loc and 4.10's and all new bearings and seals, and they were only 2 weeks old before the guy smacked the car up against a tree and totaled it. Here's where the deal comes in... While picking up the rear end I spied a set of Steeda springs out of the corner of my eye. I got the rear end, and the 4 Steeda springs for $300. I got a good deal and talk about a time saver! Sometimes i really hate doing gears on an 8.8. LOL. I'll post pics once I get everything done.
 

98E9GT

New Member
Dec 16, 2007
110
0
0
Aug 22, 2008
#2
  • Aug 22, 2008
  • #2
You lucky B@st@ard! I wish I could find a deal like that. Im not wanting to pay full price for some sportlines and 3.73's. You should post up some pics with the steeda's on!
 

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
Aug 22, 2008
#3
  • Aug 22, 2008
  • #3
i will most definitely post the pics when i am done with everything. i am hoping to get it all done tomorrow. i would have gotten it done today but we were pretty busy at the shop. we only have 6 bays, 5 if you take away the alignment rack. i dont know what i am more excited about...the 4.10's or getting rid of the 4x4 stance.
 

snidehockey

New Member
Jun 18, 2007
131
0
0
Orlando, Fl
Aug 22, 2008
#4
  • Aug 22, 2008
  • #4
dude...I'm in Orlando too, and have been dying to find some cracked up stangs! Is he open to the public? what's it called?
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,402
3,548
233
Aug 22, 2008
#5
  • Aug 22, 2008
  • #5
Killer deal! Just to rebuild a Trac Loc and have gears installed.... man you saved a ton of money
 

Lesane

New Member
Sep 1, 2004
17
0
1
Orlando, FL
Aug 23, 2008
#6
  • Aug 23, 2008
  • #6
snidehockey said:
dude...I'm in Orlando too, and have been dying to find some cracked up stangs! Is he open to the public? what's it called?
Click to expand...

+1!!! There are a few parts I'm looking to get when I get back, and the salvage yards in Kissimmee/St.Cloud are REDICULOUS when it comes to pricing!
 

snidehockey

New Member
Jun 18, 2007
131
0
0
Orlando, Fl
Aug 23, 2008
#7
  • Aug 23, 2008
  • #7
yeah all they ever have is camry's corollas and like grand am's or somethin.there's one over on John Young, south of 192 that had like 3 OK conditioned new edge v6's, but they didn't have the cowl that I needed or anything else.
 

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
Aug 23, 2008
#8
  • Aug 23, 2008
  • #8
i can see what he has left. he is closing his shop so i dont know what all is left. i am looking at taking over his inventory of what he has left here in the very near future. i am in the process of getting together what i need to open my own performance shop. if and when i do that i will post up a list of everything on a website. i know there are several here in orlando but i am going to try something different...have good customer service. lol. i am setting up my shop to be able to do everything except dyno tune.
 

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
Aug 23, 2008
#9
  • Aug 23, 2008
  • #9
lkq and j&b dont have squat eiter. lkq does have a 460 out of an old f250 though for 200 bucks.

also...mustang car show and dyno day tomorrow at the hooters on lake underhill. starting at noon. so i have been told. ill get back to yall on that later.
 

02nightmaregt

To hell with your Mustang, I want to see your HOG!
Jul 1, 2007
513
4
19
Southern Indiana
Aug 23, 2008
#10
  • Aug 23, 2008
  • #10
Dude thats awesome. You'll love them 4.10's. Gears are an awesome mod. The springs will be sweet as well. I was sooooo happy when i got my c-springs. Congrats
 

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
Aug 23, 2008
#11
  • Aug 23, 2008
  • #11
ok, got the rear end in. did the full rear axle swap and bled the brakes in less 2 hours. its raining so i couldn't get on it a whole lot. i could tell a little difference though. i rant out of time for the springs. lol, everyone was like "why dont you do the back and finish the fronts later"...but im not going to take it to the show tomorrow looking like im chillin with the homies. anyways, i am in no rush to get the springs done. the pics will have to wait. i should get my clutch in on tuesday i hope.
 

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
Aug 25, 2008
#12
  • Aug 25, 2008
  • #12
I got the rear in on Saturday. Yesterday was the first sunny day we have had in a while so I took it to the car show at Hooters and did a little "spirited" driving. Can't do a whole lot until i get the clutch in. my only question is...Why did it take me so long to get the gears?!?! LOL!!!

Also, I met the guy at the car show that owned the car that I got it out of. The rear end and springs were actually factory take off from this guys 2001 or 2002 Saleen that was putting down about 500 to the wheels.

The story goes on how he wrecked the car is something like this: He was goofing off with some friends and whipped the rear end of the car around and wasn't wearing his seat belt. He whacked his head on the drivers side window so hard that it made him black out. The car took off while he was out of it and it got wrapped around a tree. I saw the car in the shop and they actually had to cut him out of the car! The sad part of the story is that he thinks it's funny and that was his 3rd Mustang that he has totaled and now he is driving a Cobra with 650 rwp that he street races.

I'm looking forward to using that one as a doner car as well! HAHAHA!!!
 

LaserSVT

Got FB banned again for saying nards
Founding Member
Nov 29, 1999
9,402
3,548
233
Aug 25, 2008
#13
  • Aug 25, 2008
  • #13
Some people should be smacked and/or killed
 

flstang65

10 Year Member
Dec 6, 2007
1,484
135
94
SE Georgia
Aug 26, 2008
#14
  • Aug 26, 2008
  • #14
Ok, so I changed the fluid in the rear this morning. Mostly because I wanted to see how things have worn since the gears have been put in and partially to put the diff cover from my old rear on since its in better shape. I got the cover off and everything looked perfect. But, here is the best part...my $300 deal just keeps getting better. There was no rebuilt Trac-Loc in there...there was a brand spanking new Auburn Gear posi unit. Its nice to have some good luck for a change!
 
You must log in or register to reply here.

Similar threads

F
Ford 460 swap
  • Ford460
  • Sep 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
6
Views
491
1996 - 2004 SN95 Mustang -General/Talk- Sep 14, 2026
Ford460
F
D
Drivetrain Will a broken s spring affect traction?
  • dqureshi06
  • Jan 12, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
308
Fox 5.0 Mustang Tech Jan 16, 2026
Mustang5L5
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
19
Views
982
1996 - 2004 SN95 Mustang -General/Talk- Yesterday at 10:08 AM
squeak93
S
Speedometer Calibration
  • Sonny Bibb
  • Sep 11, 2026
  • Digital Self-tuning Forum
Replies
4
Views
359
Digital Self-tuning Forum Sep 13, 2026
Sonny Bibb
S
W
Speedometer and shifting issues
  • wyatt-tetro891
  • Aug 17, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
315
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 18, 2026
wyatt-tetro891
W
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?