checked front rotor runout

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
Im trying to track down the source of the front wheel shimmy and brake pedal pulse when brakes are applied.I checked the runout inside and out of the new rotors and they are showing .002-.003 max, is that too much? there is no play in the front end components at all,wheel bearings are also good.
 
Well, does the steering wheel shake under braking? Or is it through the rear of the car? Just because the rotors arn't warped doesn't mean the brakes aren't causing the problem. What is the condition of the surface of the rotors? Any hotspots (darker spots or areas of the rotors) is the surface blue?
 
warped rotors wont usually cause a brake pedal pulsation on our cars since it has floating calipers. but thickness variance will. measure the rotor side to side with a micrometer in like 12 places and see if the numbers are the same. also, brake drums that are out of round will cause a pedal pulsation. just a few ideas for ya