Chris Alston's Chassisworks 8pt roll cage

M

Maxamil

Founding Member

Feb 14, 2001

479

0

16

Fresno, Cali

Sep 19, 2004

#1

• Sep 19, 2004

• #1

Has anyone seen or have this kit installed on their 66' mustang?? I am thinking about getting this kit and I was wondering what the difficulty of installing this kit is. I have no welding expirence so installing it myself is out of the question. I just wanted to know if anyone has this kit installed in their car. The link to the website is:

http://www.cachassisworks.com/

Click on roll cages and look at the kits offered. Let me know what you guys think, becuase Autopower I feel is WAAAAYYY overpriced.

 

Route666

Active Member

Aug 16, 2003

1,652

6

39

Brisbane, Australia

Sep 19, 2004

#2

• Sep 19, 2004

• #2

I like the look of the 7001 for a streeter, nice price too.

Looking at the options, I hope 7020 (4130 Chrome Moly 8 Point Roll Cage) isn't an EXTRA 470 bucks.

Anyway, I haven't seen these in person, couldn't attest to the quality, but the price looks alright to me.

 

F

fastcoupe68

Member

Mar 10, 2004

368

0

17

nj

Sep 19, 2004

#3

• Sep 19, 2004

• #3

I have used and installed quite a few kits from CACW and there stuff is good, Just remember it is pretty general and you need to trim to fit, and unless you are building a a car that is a full blown racer you dont need chrome moly.

 

S

Snail50

Founding Member

Mar 24, 2001

787

0

0

Miami

Sep 19, 2004

#4

• Sep 19, 2004

• #4

Aren't they the ones who took over TCP?

& nice avatar.

 

Route666

Active Member

Aug 16, 2003

1,652

6

39

Brisbane, Australia

Sep 19, 2004

#5

• Sep 19, 2004

• #5

What are the advantages to chrome-moly? Is it more rigid and/or lighter? Like you could use a thinner walled tube and still have the same rigidity, or the same thickness and have increased rigidity?

 

B

billy

Founding Member

Apr 1, 2002

356

0

16

White Lake, MI

Sep 19, 2004

#6

• Sep 19, 2004

• #6

Like fastcoupe68 said you dont need chrome moly unless it is a total race car....

It is much lighter in weight....

Also you can not Mig weld Chrome Moly... It must be tig welded....

Billy

 

67bluestang

New Member

May 13, 2003

193

0

0

Tucson, Arizona

Sep 19, 2004

#7

• Sep 19, 2004

• #7

Yes, chrome-moly is stronger so you can run a thinner wall material. If you use chrome-moly, you'll have to find someone to tig weld it. Mig welding will make it brittle and highly susceptible to cracking.

 

Route666

Active Member

Aug 16, 2003

1,652

6

39

Brisbane, Australia

Sep 19, 2004

#8

• Sep 19, 2004

• #8

Thought as much. Thanks!

 

M

Maxamil

Founding Member

Feb 14, 2001

479

0

16

Fresno, Cali

Sep 20, 2004

#9

• Sep 20, 2004

• #9

fastcoupe68 said:

I have used and installed quite a few kits from CACW and there stuff is good, Just remember it is pretty general and you need to trim to fit, and unless you are building a a car that is a full blown racer you dont need chrome moly.

Click to expand...

Guys I think we are getting a little off topic here. I wanted to know if you had any pictures of this kit instaled.

Fastcoup68: Do you have any pics of this cage installed on a car?? How much fab work do you think I have to do to get the cage to fit right??

I am comparing this cage to the one made by Autopower. The autopower is 4 times the cost, so if I have to pay someone to weld this cage maybe its cheaper to buy the autopower. Any suggestions or comments or ideas are welcome.

 

F

fastcoupe68

Member

Mar 10, 2004

368

0

17

nj

Sep 20, 2004

#10

• Sep 20, 2004

• #10

you are going to have to trim every bar that this kit comes with. then you will have to fishmouth all the bars also. Like I said it is a pretty general kit that you are going to have to spend alot of time on. This is done this way because everyone puts these things in differently so they give you enough material to do what ever you want. I have never sen the auto set up but I suspect it is more of a (bolt in style) that you wont have to do much to it but weld it in. The only problem I have is that I would want to know if the auto kit is legal in what ever type of sanctioning body you will use it in, alot of autocross type rollbars are not NHRA legal. If you intend to use this car at a NHRA type of event I recomend you get a rule book and make sure it will be legal. It would suck to put this thing in and go to an event and not be able to pass tech.

 

M

Maxamil

Founding Member

Feb 14, 2001

479

0

16

Fresno, Cali

Sep 22, 2004

#11

• Sep 22, 2004

• #11

Does anyone that lives in Cental Cali. want to help me install one of these kits??? =)