Church401 street car build!

FoxMustangLvr · Mar 22, 2018

Church401 said:
Well I'm not sure what the capabilites of the sct are but I'm going to stick the car in closed loop and tune using a wideband. If sct cant do it, ill pick up a tweecer or whip up a megasquirt, because the car is going to be big single turbski.

I run a Pimp ECU and like all EFI tuning they need a wideband O2. Some oxygen sensors are designed to run through your factory HEGO harness, most are independent of it. Make sure you do your homework.

Church401 · Mar 25, 2018

What's up guys. Quick mini update. Over the weekend. I got the engine and tranmission out of the car.

I separated the headlight harness and charging harm to run through the dash. I extended the bap sensor, mounted the relays for the fuel pump and a.c.. I picked a final place for the started solenoid and hooked up the fuseable links. I also installed the battery relocation kit.

(http://imgur.com/a/cc00J) View: https://imgur.com/a/cc00J

(http://imgur.com/a/l2WTv) View: https://imgur.com/a/l2WTv

View: https://imgur.com/a/yH2T7

(http://imgur.com/a/2EESc) View: https://imgur.com/a/2EESc
X

And I got the rust cut out on the driver side. I would love some input about the rust situation.
I actually have the whole front end of a completely rust free California car. I'
Going to cut the frame rail out of that and weld it in place. Or I could buy the scottfab frame rail. The driver side only needs a patch so I'm not worried.

(http://imgur.com/a/uCWAK) View: https://imgur.com/a/uCWAK

Can somebody help me identify these shortys?

(http://imgur.com/a/yH2T7) View: https://imgur.com/a/yH2T7

Church401 street car build!

FoxMustangLvr

I love my Pimp

Church401

Member

Similar threads

Church401 street car build!

FoxMustangLvr

I love my Pimp

Church401

Member

Similar threads

Privacy & Transparency

Privacy & Transparency