clear marker lenses

M

mikes06gt

New Member

Sep 9, 2006

47

0

0

Sep 20, 2006

#1

• Sep 20, 2006

• #1

i bought a set of the clear side marker lenses to replace the red ones on the back of the car...i started installing them yesterday but could not figure out how...i pulled all of the carpet and trim out of the inside of the trunk, but no cigar...maybe i am overlooking something...if any of you have installed these any help would be great...thanks...by the way i put the clears in the front and have the ultra white/blue bulbs in the headlights/foglights and corners...it looks amazing

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Sep 20, 2006

#2

• Sep 20, 2006

• #2

they are installed in the bumper, not the sheetmetal. you will need to get to the backside of the bumper to remove them.

 

L

lilflipa82

New Member

Jan 25, 2006

13

0

0

Ft. Lauderdale, FL

www.cardomain.com

Sep 20, 2006

#3

• Sep 20, 2006

• #3

what kind of bulbs did you get for the headelights and fog lights??
And How much were they and were they easy to install.
Thanks

 

M

mikes06gt

New Member

Sep 9, 2006

47

0

0

Sep 20, 2006

#4

• Sep 20, 2006

• #4

i bought the headlights and foglights from blue oval..they came together in a kit..for all four bulbs it was in the area of $68 with shipping..the headlights were not bad had to remove the factory airbox on one side the other was right in...the foglights i had the dealer do when i had the oil changed...it was 20 bucks i think it was well worth it...the corners were easy too..now if i could just get the back ones and the license plate lights changed out

 

M

mikes06gt

New Member

Sep 9, 2006

47

0

0

Sep 20, 2006

#5

• Sep 20, 2006

• #5

and big cat you are saying i cant change them through the trunk that the bumper has to come off?that would have to be an expensive light bulb change...oh well thanks anyway

 

bigcat

start with the upper hole, and if more traction is

May 1, 2005

3,015

1

79

7200 feet

Sep 20, 2006

#6

• Sep 20, 2006

• #6

you might be able to reach up behind the bumper. i would have to look at it tomorrow in the daylight.

 

M

mikes06gt

New Member

Sep 9, 2006

47

0

0

Sep 23, 2006

#7

• Sep 23, 2006

• #7

i finally got them in and it was not hard after i figured out how.you have to go through the trunk.remove the trim panel on the back and then the carpet on the sides there are little vents.you have to stick something ,i used my finger, in there and compress the clip and they pop right out...well worth it too.i put the ultra-white bulbs in too and it looks awesome.highly recommend this change