• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Clunking From Passenger Front Wheel/suspension

  • Thread starter Thread starter Wreckless
  • Start date Start date Aug 6, 2012
W

Wreckless

New Member
Jun 26, 2011
26
1
3
Aug 6, 2012
#1
  • Aug 6, 2012
  • #1
Hi all, my gf has a 2007 v6 mustang with about 45,000 miles on it (for sale too). It makes a noise from the front-right side of the car when driving, the noise increases in frequency the faster you go. It's kind of like something is rotating, and metal hitting metal.

The tire pressure monitor fault gauge is up too, but tire pressure is ok. I know it's because the front right tire isn't spinning properly. What can you guys recommend to fix this? Thanks in advance!
 

SpartaPerformance

10 Year Member
Nov 5, 2006
2,517
61
89
Long Island NY
Aug 6, 2012
#2
  • Aug 6, 2012
  • #2
Sounds like the TPMS sensor strap has broken and rolling around in the tire as you drive.
 

ct07gt

Member
Feb 14, 2008
377
0
16
Aug 8, 2012
#3
  • Aug 8, 2012
  • #3
I think if it was something inside the tire then it would increase in frequency as you speed up until a certain point and then get quiet as the part gets held against the tire by centrifugal force. This might be what is happening but he didn't say it stopped at higher speed.
What do you mean the tire isn't spinning properly? Like it is dragging on something? Is it a clunking noise or grinding?
 
W

Wreckless

New Member
Jun 26, 2011
26
1
3
Aug 9, 2012
#4
  • Aug 9, 2012
  • #4
Thanks for the responses.

By the tire not spinning properly I merely meant the noise...sorry about any confusion.

I'm going to try and rotate the tire with the drivers rear tire to see if the noise transfers, else I know it's from the suspension...
 
S

ski

Member
Dec 14, 2004
380
2
18
Aug 9, 2012
#5
  • Aug 9, 2012
  • #5
Check if the wheel is rubbing against the brake caliper.
 
W

Wreckless

New Member
Jun 26, 2011
26
1
3
Aug 9, 2012
#6
  • Aug 9, 2012
  • #6
Thanks, will do.

This weekend once I give the car an oil change, I'll rotate the tire to the opposite side to see if the noise transfers, etc.
 

ct07gt

Member
Feb 14, 2008
377
0
16
Aug 10, 2012
#7
  • Aug 10, 2012
  • #7
If it is something in the tire you can just take it off and roll it on the floor and see if it makes noise. If the wheel is rubbing on something you will see a shiny spot on the wheel I would think. Make sure the tire is not rubbing on the wheel well, mine does with the wheel turned all the way, but I run 18x10 wheels with 275 width tires.
 
You must log in or register to reply here.

Similar threads

2
Electrical mayhem
  • 2000ElectricGreen
  • Mar 13, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
250
1996 - 2004 SN95 Mustang -General/Talk- Mar 24, 2026
2000ElectricGreen
2
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
3
Views
115
Other Auto Tech May 31, 2026
LILCBRA
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
665
1996 - 2004 SN95 Mustang -General/Talk- Jan 11, 2026
02_2v_Curtis
0
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
475
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?