• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch Cable help

  • Thread starter Thread starter Angelsnake13
  • Start date Start date Aug 24, 2007
A

Angelsnake13

New Member
Aug 9, 2007
3
0
0
Bridgeview
Aug 24, 2007
#1
  • Aug 24, 2007
  • #1
Hello I'm big issue i just recently bought my mustang n the clutch cable went bad, its one of those cheap adjustable clutch cables now the problem that i am having is that i cant find the same type of cable that i need.
the part that would connect to the quadrant is different then stock i belive this was custom work from previous owner
old cable part that connects to pedal assembly looks like this


i had bought an oem cable n looked at the adjustable cables and both of them had same type of head


THIS IS HOW THE PEDAL Assembly LOOKS LIKE (sorry best pic i could take Really cramped in there)


So does anyone know were i can find a cable like this one or if its from another type of vehicle that fits or do i have to change everything back
 

Attachments

  • Picture161.webp
    19 KB · Views: 144
  • Picture158.webp
    10.4 KB · Views: 130
  • Picture183.webp
    9.9 KB · Views: 131

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Aug 25, 2007
#2
  • Aug 25, 2007
  • #2
it looks like you're missing the clutch quadrant and the guy just fabbed up and end to put on the shaft that the quadrant normally goes on. is there a quadrant up there?
 
A

Angelsnake13

New Member
Aug 9, 2007
3
0
0
Bridgeview
Aug 25, 2007
#3
  • Aug 25, 2007
  • #3
no there isnt a quadrant, but that shaft now is out of place isnt it because it should be sort of pointing foward shouldnt it but instead is pointing up, can i change that by loosening the nut in the beginning of the assembly?

i still cant belive i didnt realize that it was only missing the quadrant, thanks
 

cenok is family

15 Year Member
Jun 25, 2003
1,409
69
79
Norman, Ok
Aug 25, 2007
#4
  • Aug 25, 2007
  • #4
Angelsnake13 said:
no there isnt a quadrant, but that shaft now is out of place isnt it because it should be sort of pointing foward shouldnt it but instead is pointing up, can i change that by loosening the nut in the beginning of the assembly?

i still cant belive i didnt realize that it was only missing the quadrant, thanks
Click to expand...

there should be two shafts that the quadrant slides onto. both point towards the passenger side of the car. i don't fully understand when you say the shaft is out of place but it could be bent now, since the cable was directly hooked up to it and it alone.
 
A

Angelsnake13

New Member
Aug 9, 2007
3
0
0
Bridgeview
Aug 25, 2007
#5
  • Aug 25, 2007
  • #5
Basically what i was asking is that my shaft that holds the quadrant is pointing directly up, n i was askin if i could move the position of that part but i figure i should try it to explain it better


on this one its pointing down n on mine its sort of backwards pointing up it would be upside down so i was asking if i was able to move the position of that towards the correct one.
i think i can change that just wanted to make sure if anyone could tell me.
 

Attachments

  • f7506a.webp
    9.9 KB · Views: 148
You must log in or register to reply here.

Similar threads

Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
895
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
555
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
T
Vibrating clutch pedal
  • t.hite10
  • Aug 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
279
1996 - 2004 SN95 Mustang -General/Talk- Aug 11, 2026
squeak93
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
597
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
00 4.6L V8 new clutch won’t go into gear when on?
  • Timboslice
  • Aug 15, 2026
  • The Welcome Wagon
Replies
3
Views
242
The Welcome Wagon Aug 21, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?