• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch Cable

  • Thread starter Thread starter 86bluecobra
  • Start date Start date May 25, 2007
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 25, 2007
#1
  • May 25, 2007
  • #1
Does anyones clutch cable feel odd once there car gets up to temperature?
My clutch and everything feels great when the car is cold but once I am up to a normal Temp the clutch cable feels odd. Almost like there is no way to engage it smoothly. Tou try to engage clutch from a stop to start rolling and it is like it is stuttered. Jerky maybe is a good way to describe it. The clutch cable is routed in the stock location and there are no issues with grinding or anything like that. I don't know how to describe it anybetter then that.
Anyone else experienced this and if so how do I fix it?
Is it just the cable getting worn out?
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
May 25, 2007
#2
  • May 25, 2007
  • #2
i just went through the same thing. im pretty sure it was the throwout bearing getting stuck on the retainer.

edit: does it slide on the shaft or the retainer? anyways my fork would not slide smooth
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
May 25, 2007
#3
  • May 25, 2007
  • #3
just wanted to clarify what im saying. if you picture the tranny on the ground in front of you with the bell attaced, the fork should slide front to back with little effort. mine would get caught up and take some effort to move. the throwout bearing was dry and kinda rusty. my clutch was also slipping so i replaecd everything while in there but i think that was the problem with it getting caught up.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 25, 2007
#4
  • May 25, 2007
  • #4
why does it seem to be only at temp?when its cold it is nice.
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
May 25, 2007
#5
  • May 25, 2007
  • #5
not sure but mine did that too. in the moring it would feel nice but not for long.
 

legalize420

Active Member
May 21, 2005
1,541
1
37
South Florida
May 25, 2007
#6
  • May 25, 2007
  • #6
i could also rule out the cable for sure. i installed a brand new MM cable and the problem was still there
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 25, 2007
#7
  • May 25, 2007
  • #7
I guess what you say makes sence since the car did sit all winter. Perhaps there is a little corrosion on the retainer. I installed a new fork and pivot bearing last year. I'll maybe spray something in there. Avoiding the clutch and flywheel obviously.
 

BigHairyMonkey

Founding Member
Jun 18, 2003
411
1
16
Houston (Bellaire) TX
May 25, 2007
#8
  • May 25, 2007
  • #8
mine does this ALOT, i always thought i was the only one having this wierd problem. I just try to adjust my shifting and feed a little bit of throttle. All my drivetrain compenents are new, tob etc so i dont know
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 25, 2007
#9
  • May 25, 2007
  • #9
Well my 351w seems to pump out alot of heat so I wondered if it was an issue with heat. Tomorrow i'll jack the car up and have a little look at the retainer. Another friend suggeseted sparying WD-40 down the clutch cable. I'll give this a try aswell. I want it to feel nice. Not only that I want it to come off a stop nice. I look like an A$$ around town when the car starts bucking a little from a stop. I look like a newbie on a stick.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 26, 2007
#10
  • May 26, 2007
  • #10
The heat possibility is a good one. It can affect cable operation.

A note: if you hose the cable with WD40, it can actually end up attracting dirt later on. I might try it myself for diagnostics (if you were going to try another cable anyhow) but it was worth mentioning and something to remember if the cable balks in the future.

Good luck.
 
You must log in or register to reply here.

Similar threads

Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
896
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
M
85 Capri 5.0 transmission rattle
  • Mamaclean
  • May 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
259
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2026
Mamaclean
M
S
Engine Stalls when downshifting/coasting
  • Scott_S
  • Nov 5, 2025
  • Fox 5.0 Mustang Tech
Replies
11
Views
916
Fox 5.0 Mustang Tech Nov 6, 2025
Mustang5L5
K
TKX Transmission Shifting Problem
  • KWC156
  • Jun 23, 2025
  • Other Auto Tech
  • 2
Replies
21
Views
3K
Other Auto Tech Jun 13, 2026
427nostang
4
B
Where to go from here on my build…
  • B0udreaux
  • Jul 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
468
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 18, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?