• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Clutch chattering and squeaking

  • Thread starter Thread starter HoustonGT
  • Start date Start date Apr 5, 2006

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Apr 5, 2006
#1
  • Apr 5, 2006
  • #1
Hey guys. I posted a thread a few days ago about a chattering and squeaking noise and thought it was the a/c clutch and pulley. Then yesterday i kept messing with it and noticed that the noise went away completely when i pushed the clutch in. So i realized it was the clutch making the noise, not the a/c clutch or pulley.
My question is, how is it that the clutch is chattering and starting to go yet i have absolutely no slipping and can still bark into 2nd gear with no problem? Did one of the pucks just get wore down or what? Thanks In Advance guys

BTW, i got a quote for a clutch install and Houston Performance said $225, so im happy
 

DTNODYA

Member
Dec 15, 2005
831
1
16
Apr 5, 2006
#2
  • Apr 5, 2006
  • #2
Next time you are inside your car, windows up, radio off .. when you push the clutch in does it make like a groaning sound? Or at idle in neutral with the clutch engaged (pedal not pressed) does it chirp? If so it is your throw out bearing. That's all I know. SVT or one of teh other pros will have a better idea if what I described above is not your issue.
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Apr 5, 2006
#3
  • Apr 5, 2006
  • #3
DTNODYA said:
Next time you are inside your car, windows up, radio off .. when you push the clutch in does it make like a groaning sound? Or at idle in neutral with the clutch engaged (pedal not pressed) does it chirp? If so it is your throw out bearing. That's all I know. SVT or one of teh other pros will have a better idea if what I described above is not your issue.
Click to expand...
Yea my throwout bearing does make noise, but i thought that chattering is caused by the clutch itself Also, i notice that the car shutters and chatters when i let the clutch out from a stop in first and get going.

I mean if its just the throw-out bearing and i have to pay for labor, i might as well change the clutch out while the tranny is being worked on anyways
 
M

mustangsCobra12

New Member
Aug 8, 2003
28
0
0
Azle, TX
Apr 5, 2006
#4
  • Apr 5, 2006
  • #4
to fix the throw out bearing chirp...

get some lithium grease and if you get underneath your car you'll notice three air notches at the bottom of the tranny. If you shine a light in these wholes you will see the throw out bearing. But when putting the lithium grease on make sure not to hit anything else.
 
C

cooper

New Member
Dec 9, 2005
96
0
0
Apr 5, 2006
#5
  • Apr 5, 2006
  • #5
my car was shuttering and struggling to get going and it turned out the motor mounts were shot, and I mean junk! this was after the 2nd clutch and bout 90,000 mi. could be that also?
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Apr 5, 2006
#6
  • Apr 5, 2006
  • #6
cooper said:
my car was shuttering and struggling to get going and it turned out the motor mounts were shot, and I mean junk! this was after the 2nd clutch and bout 90,000 mi. could be that also?
Click to expand...
HOw can i check and see if those are still okay or not? I only have 47k miles
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Apr 5, 2006
#7
  • Apr 5, 2006
  • #7
BUMP
 
F

FalconGuy016

New Member
Oct 26, 2004
437
1
0
Northern VA
Apr 5, 2006
#8
  • Apr 5, 2006
  • #8
mustangsCobra12 said:
to fix the throw out bearing chirp...

get some lithium grease and if you get underneath your car you'll notice three air notches at the bottom of the tranny. If you shine a light in these wholes you will see the throw out bearing. But when putting the lithium grease on make sure not to hit anything else.
Click to expand...

I have the chirp. How do you put it on? On a little stick or something? I am glad to see I might not have to go in for warrenty work on this.
 

Mike97gt

it doe snot
Founding Member
Jan 26, 1999
10,633
7
89
the people's republic of massachusetts
Apr 5, 2006
#9
  • Apr 5, 2006
  • #9
your TOB is gone. you can try to lube it that might make it go away for a little while. but it will come back.
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Apr 5, 2006
#10
  • Apr 5, 2006
  • #10
svttech76 said:
your TOB is gone. you can try to lube it that might make it go away for a little while. but it will come back.
Click to expand...
So the clutch might still be okay or i guess i should just change it out while they got the clutch out
 
C

cooper

New Member
Dec 9, 2005
96
0
0
Apr 5, 2006
#11
  • Apr 5, 2006
  • #11
HoustonGT said:
HOw can i check and see if those are still okay or not? I only have 47k miles
Click to expand...
i took it to a friend who works at a dealer. he put the car on the lift and with a screw jack (gues thats what you call it) lifted the motor from the oilpan, very carefullike. we could see the cracks in the rubber when he lifted and lowered the jack. after we replaced them you could realy see how bad they were.
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Apr 6, 2006
#12
  • Apr 6, 2006
  • #12
cooper said:
i took it to a friend who works at a dealer. he put the car on the lift and with a screw jack (gues thats what you call it) lifted the motor from the oilpan, very carefullike. we could see the cracks in the rubber when he lifted and lowered the jack. after we replaced them you could realy see how bad they were.
Click to expand...
Hmm interesting, was install cheap or not? The motor mounts themselves can't be alot but im pretty sure its my clutch. I just don't get why the chattering gets worse when i turn the A/C on unless the a/c pulley and clutch are starting to go too
 
C

cooper

New Member
Dec 9, 2005
96
0
0
Apr 6, 2006
#13
  • Apr 6, 2006
  • #13
not too sure what you mean about bad install? well my car has always been more difficult to drive with the a/c on! when my bud told me it was the motor mounts that was probably the problem instead of the clutch , I was like yah sure!!?? and one motor mount was shreaded, gone , and the other was in poor condition. problem solved , no more shuttering , lurtching ,or grabby clutch from a start. but i instaled a k c clutch 4 weeks ago and the TOB is squelling like a pig??? brang new TOB? ohh the clutch fork vibrates also? go figure! look at all rubber mounts for cracks or wear. 65.00$ for motor mounts and no more worries about a 300-600 clutch JOB.
 

HoustonGT

Gilded Gelding
Apr 6, 2003
1,418
0
0
Houston
Apr 6, 2006
#14
  • Apr 6, 2006
  • #14
Is it easy to check the motor mounts in my driveway with a jack and jackstands or do i need a lift?
 
C

cooper

New Member
Dec 9, 2005
96
0
0
Apr 6, 2006
#15
  • Apr 6, 2006
  • #15
on the lift with a pro is the best, I guess you could do it with a jack, but that might be a real pita. maybe talk to a local shop , or even call and ask your dealer about an inspection?
 
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
2K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Engine Bad engine shaking at idle
  • sav22rem22
  • Jan 2, 2024
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
6K
Fox 5.0 Mustang Tech Feb 2, 2024
sav22rem22
J
Drivetrain Transmission making chattering nose under wot
  • JesusKing
  • Apr 4, 2021
  • SN95 4.6L Mustang Tech
Replies
1
Views
861
SN95 4.6L Mustang Tech May 13, 2021
TWood
T
03 Gt battery issues while driving
  • ThatBlack4.6
  • Nov 17, 2023
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Dec 1, 2023
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?