clutch fork clips! where to find?

[mustang_montana]

after doing the t5 swap a few months back, I was forced to make my own clip/bracket to attach the clutch cable to the clutch fork lever. i have the bracket that connects the dog bone to the fork, but not the lever to the clutch cable bracket. i dont have the equipment to "make" a better one, and the one i made wont make it through winter. can someone please tell me where to find these godforesaken brackets? i even bought another bellhousing to steal the clips from it, but the a-hole had done the same thing...parking brake cable brackets are the same but nowhere to be found as well... thanks guys

 

[wicked93gs]

I just used a small L bracket and an adjustable cable and so far it works without an issue(also using a double hook quadrant and firewall adjuster

 

[mustang_montana]

im considering using a setup like that, as i really need to be able to adjust the cable. what im using to connect it right now is similar, only its a non adjustable cable. im too embarrased to put a picture up, it looks retarded but it is strong enough, just afraid the cold temps will break it.

 

[wicked93gs]

adjustable cables are like $30 or so, so its no big deal...you should have seen the ghetto setup the previous owner had on the svo...I replaced it ASAP because I was afraid it was going to break any time...if you want something a bit lighter and smoother you could always convert to a hydraulic setup with a pull style slave(or push style depending on how you mount it) cable works fine for me hough