• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch Noise?

  • Thread starter Thread starter funkbuster
  • Start date Start date Apr 4, 2005
F

funkbuster

New Member
Apr 4, 2005
6
0
0
Apr 4, 2005
#1
  • Apr 4, 2005
  • #1
Ok. Last week me and my dad put a new clutch in my car. Today, when got to my house, I reved up my engine with the car in neutral, and it made a weird sound. It was kind of like a ticking sound. I didnt notice it when I was driving. It does it when I rev it up and it drops back down. When it gets back to the lower rpms it makes the sound. When I push in the clutch just a little bit, the sound stops. Does anyone know what my problem is? Also, my clutch pedal has been vibrating when I am driving. It vibrates when it is all the way out, but if I put my foot on the pedal a little bit, it stops vibrating. This makes me think these two things are related. It just today started the sound. Any ideas?
 

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
Apr 4, 2005
#2
  • Apr 4, 2005
  • #2
Throw out bearing maybe? Did u replace that when u were in there?

DC
 
F

funkbuster

New Member
Apr 4, 2005
6
0
0
Apr 4, 2005
#3
  • Apr 4, 2005
  • #3
yeh. I got an entire clutch kit minus a fly wheel. I got my flywheel resurfaced though.
 

feifong

New Member
Apr 4, 2005
319
0
0
mesa
Apr 4, 2005
#4
  • Apr 4, 2005
  • #4
cc

the noise is your clutch cable it is hitting agains the tranny metal piece you need a new cable or its just loose
 
F

funkbuster

New Member
Apr 4, 2005
6
0
0
Apr 4, 2005
#5
  • Apr 4, 2005
  • #5
Ok thanks alot. Now a questiona bout that. Is there a way to tighten the stock cable? If not, can I buy an adjuster that goes on the firewall and use it with the stock cable?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 4, 2005
#6
  • Apr 4, 2005
  • #6
funkbuster said:
Ok thanks alot. Now a questiona bout that. Is there a way to tighten the stock cable? If not, can I buy an adjuster that goes on the firewall and use it with the stock cable?
Click to expand...
lift up on the stock pedal to adjust the stock cable.

a FWA works with the stock cable (which is the preferred cable and reason FWA's are around - most aftermarket cables are adjustable without a FWA).

good luck.
 
J

jloc_stang03

New Member
Aug 22, 2007
5
0
0
whidbey island, wa
Aug 28, 2007
#7
  • Aug 28, 2007
  • #7
new clutch installed has chattering noise

i have a 2003 mustang gt convertable and i just had a new corbra clutch kit installed and my tranny fluid change but the clutch still makes a little chattering noise but goes away when i push on the clutch its not loud or anything i have to put my head down lower to hear it. the people that put the clutch in said that it is normal and it will go away in about 500 to 1000 miles when the clutch is fully broke in, but also when u rev it up while ur in nuetral it u can also can hear rhe chattering noise to. I am just to find out if this is normal or not .
 
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
737
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
T
Vibrating clutch pedal
  • t.hite10
  • Aug 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
279
1996 - 2004 SN95 Mustang -General/Talk- Aug 11, 2026
squeak93
Clutch pedal to Quadrant lag
  • Potomus Pete
  • Aug 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
13
Views
412
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
Noobz347
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
329
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
D
Loud noise(s) from Engine Bay
  • DuluthFoxbody
  • Oct 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
382
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 5, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?