clutch problems

E

everynameistake

New Member

Nov 22, 2004

36

0

0

Jun 5, 2005

#1

• Jun 5, 2005

• #1

well i installed a new clutch about a month ago. and tonight i was running it through the gears, and after it the clutch disengaged way low and its hard to get in to gear. i was thinking the auto adjuster might have been screwed up. idk thow. btw the clutch is the king cobra.

 

S

slow93

New Member

May 3, 2005

406

0

0

Jun 5, 2005

#2

• Jun 5, 2005

• #2

what kind of cable and quadrant do you have?

 

E

everynameistake

New Member

Nov 22, 2004

36

0

0

Jun 5, 2005

#3

• Jun 5, 2005

• #3

i just have the stock.

 

S

slow93

New Member

May 3, 2005

406

0

0

Jun 5, 2005

#4

• Jun 5, 2005

• #4

i think if you pull up on the pedal it will readjust the factory quardrant..i think..if im wrong let me know..that sounds like your problem to me though

 

F

fordjunky

20+ Year Stangneter

Mar 25, 2003

29

3

29

Jun 5, 2005

#5

• Jun 5, 2005

• #5

has the cable ever been replaced if so it maybe a cheap replacement type with the small clamps on the end of the cable cover. those type will not hold up with the extra pressure the pressure plate has, also if it has never been replaced, its very possable your cable has laid on the header at some time and can cause the cable cover to colabse

 

E

everynameistake

New Member

Nov 22, 2004

36

0

0

Jun 5, 2005

#6

• Jun 5, 2005

• #6

well i just did that and it did not work. however it did feel like it did adjust and then slip back when i pressed the pedel down. is there a way i can manuly adjust it so i can drive my car

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Jun 5, 2005

#7

• Jun 5, 2005

• #7

everynameistake said:

is there a way i can manuly adjust it so i can drive my car

Click to expand...

yes - with an aftermarket quadrant and FWA.

Seriously, you can get under the car to see if the cable is adjustable - it might not help if the stock quadrant wont hold its setting anyhow, but....

Good luck.