• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch problems?

  • Thread starter Thread starter 89GTBLKonBLK
  • Start date Start date Jun 18, 2006
  • 1
  • 2
Next
1 of 2 Next Last
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 18, 2006
#1
  • Jun 18, 2006
  • #1
I was driving today when all of a sudden my car started going up and down(rpm's). It felt like the car was almost stalling out but it would have been impossible in 2nd, 3rd ect.. gear. Do I need to adjust the clutch or does it look like I might need a new one?
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jun 18, 2006
#2
  • Jun 18, 2006
  • #2
was the clutch slipping or was your rpm's surging....We need more info
 
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 18, 2006
#3
  • Jun 18, 2006
  • #3
it was driving as if i was slightly pushing the gas pedal over and over rpm would jump from 2k to 2.5k and always down up down up rpm wise, the car would continue to accelerate but roughly almost like it wasnt getting gas then it would then it wouldnt if that makes sense. I didnt drive it for long for fear that I would damage something else. hope that helps. Car would Idle fine at rest so maybe slipping from the clutch?
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Jun 18, 2006
#4
  • Jun 18, 2006
  • #4
if you punched the gas would the car speed up or would the rpm's rise and then the car would slowley start to move quicker.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 18, 2006
#5
  • Jun 18, 2006
  • #5
I would pull the codes and read through Jrichker's idle surge sticky (It's inside one of the sticky folders at the top of the forum).

Good luck.
 
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 19, 2006
#6
  • Jun 19, 2006
  • #6
I figured out that the clutch must be slipping because the car is quite sluggish. What should I do about this?
 
R

rigamaroles

New Member
Jun 27, 2005
0
0
0
British Columbia
Jun 20, 2006
#7
  • Jun 20, 2006
  • #7
Perhaps a slight oversight...when was the last time you changed your fuel filter?
 
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 22, 2006
#8
  • Jun 22, 2006
  • #8
I just bought the car so I dont know when it was changed last, I will check that out. Thanks
 

Flavadave4

Active Member
Nov 28, 2003
1,044
21
49
Utica, NY
Jun 22, 2006
#9
  • Jun 22, 2006
  • #9
89GTBLKonBLK said:
I figured out that the clutch must be slipping because the car is quite sluggish. What should I do about this?
Click to expand...

I had a simular problem....the clutch was in good shape but the cable was getting caught where it passed through the firewall. I was only getting partial pressure.

I bought a BBK adjustable clutch quadrant and fixed it in no time.
 
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 22, 2006
#10
  • Jun 22, 2006
  • #10
Is it normal to have to put the clutch to the floor board for it to start, Im talking like completely down to the floor. Is it possible the cable is wearing out and that is why it dosnt fully engage? I can smell clutch after driving and getting out of the car also? If so is this an easy job or one more easily done by a mechanic?
 
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 22, 2006
#11
  • Jun 22, 2006
  • #11
ttt
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 22, 2006
#12
  • Jun 22, 2006
  • #12
89GTBLKonBLK said:
Is it normal to have to put the clutch to the floor board for it to start, Im talking like completely down to the floor. Is it possible the cable is wearing out and that is why it dosnt fully engage? I can smell clutch after driving and getting out of the car also? If so is this an easy job or one more easily done by a mechanic?
Click to expand...
It can be normal, but it has nothing to do with your clutch. There's a switch (clutch safety switch) on the arm of the clutch pedal. When the button on the switch is pressed in, it allows the car to start. You can adjust the switch, but the first time you jamb the clutch to the floor (spirited driving), it will reset and you'll be pushing the pedal to the floor to start the car. Been there and done that. No T-shirt though.

Good luck.
 
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 22, 2006
#13
  • Jun 22, 2006
  • #13
what about the sluggish driving? Should I take it to the tranny shop or is there a way to adjust the clutch cable? I havent done much with 5spds just chevy auto's.
 

donsbad68

Immensely Educated
Jan 4, 2003
838
0
0
Oklahoma
Jun 22, 2006
#14
  • Jun 22, 2006
  • #14
slap your mother for saying chevy auto in here
 
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 22, 2006
#15
  • Jun 22, 2006
  • #15
hey that helps a lot buddie thanks.
 

donsbad68

Immensely Educated
Jan 4, 2003
838
0
0
Oklahoma
Jun 22, 2006
#16
  • Jun 22, 2006
  • #16
lol sorry , im bias
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 22, 2006
#17
  • Jun 22, 2006
  • #17
89GTBLKonBLK said:
what about the sluggish driving? Should I take it to the tranny shop or is there a way to adjust the clutch cable? I havent done much with 5spds just chevy auto's.
Click to expand...
You described surging (at least that's how I interpreted the up and down part). I dont see where this has anything to do with the clutch.

A slipping clutch would have the motor run like a top but act like a world class 100 meter sprinter trying to run a best time on ice - his motion is flawless but he simply cant apply all that fluid power in an efficient means to the ground.

You would note that when you mash the gas from low RPM (often in 3rd and 4th - dont use 5th) the motor revs up but the car doesnt take off (kinda like if you ever accidentally started off from a stop in 3rd gear - you have to keep slipping the clutch to keep from stalling).

Good luck.
 
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 22, 2006
#18
  • Jun 22, 2006
  • #18
that sounds more accurate, but the reason I said clutch is because of the smell but I could be wrong, I will check out the surging writeup. I also notice 8/10 times when I let out the clutch a small popping sound, like a hammer tapping sheet metal happens just below the emergency brake. Maybe just be nothing.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 22, 2006
#19
  • Jun 22, 2006
  • #19
If not mentioned, where's the point of engagement?

Good luck.
 
8

89GTBLKonBLK

New Member
Jun 12, 2006
24
0
0
Jun 22, 2006
#20
  • Jun 22, 2006
  • #20
It is damn near to the floor
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

S
Drivetrain Downshifting from 3rd to 2nd issue
  • Scott_S
  • Apr 23, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
35
Views
1K
Fox 5.0 Mustang Tech Oct 12, 2026
limp
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
340
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
Drivetrain Broken clutch cable- what it looks like
  • JulianR
  • Aug 6, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
899
Fox 5.0 Mustang Tech Aug 10, 2026
gkomo
P
Fuel New Eldebrock 1406 problems 1985 GT 5.0
  • Paddyman
  • Oct 22, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
184
Fox 5.0 Mustang Tech Nov 2, 2026
manicmechanic007
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
601
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?