Clutch Question

[YELLOW 94]

I have a 94 GT 5 speed and need a new cluthch kit. Im not sure if I need the 10 or 26 spline.

Also I want a centerforce so if anyone has the part number for the kit let me know.

later
Orlie

 

[divit250r]

You should need the 10 spline, that's stock T5 input shaft spline count. Not sure on the part number, I bought my dual friction CF used.

Scott

 

[Wi Stang]

I don't see a different transmission listed in your sig, so I assume you are still running the stock T-5.

I got these part numbers for the clutch disk and pressure plate kit from the Centerforce website.
DF021057 - is that part number for a Dual Friction Clutch kit
01920830 - is the part number for the DFX clutch kit.

I'm not too sure what the capacity difference between the two clutches are though.

 

[5spd GT]

The 94/95 pressure plates have more clamping power under Centerforce.

A simple check of their website will give you the part numbers

10 spline is what you need, good luck, you are getting a good clutch!

 

[Cobra4075]

Are you still running the stock T-5? With those numbers, that trans is a time bomb should you hook. If you upgrade to a TKO you will need a 26 spline clutch.