• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch replaced now everything vibrates really bad!!!!

  • Thread starter Thread starter RATM
  • Start date Start date Jun 25, 2005
R

RATM

New Member
May 19, 2005
35
0
0
33467
Jun 25, 2005
#1
  • Jun 25, 2005
  • #1
well just like the title says, i had my clutch replaced about 2 weeks ago and now when i accelerate hard, it feels like my whole car is vibrating. I had the clutch, flywheel and pilot bearing replaced. I have no idea what it is, all i know is that before i had this changed, it was much smoother than it is now.

Thanks to all who help!!
 

twolo4u2c2

5 Year Member
Apr 10, 2003
330
6
29
reading, PA
Jun 25, 2005
#2
  • Jun 25, 2005
  • #2
I the flywheel the correct balance? should be 50oz imbalance for the 5.0
 
R

RATM

New Member
May 19, 2005
35
0
0
33467
Jun 25, 2005
#3
  • Jun 25, 2005
  • #3
how would i know that?? or rather, how would i find that out?
 

darthcual

Member
Mar 31, 2005
985
19
18
Arlington, TX
Jun 25, 2005
#4
  • Jun 25, 2005
  • #4
Did you do the install yourself? Usually vibration is attributed to oil on the clutch or flywheel which causes it to catch, break free, catch which would give you the vibration your feeling.
 
R

RATM

New Member
May 19, 2005
35
0
0
33467
Jun 25, 2005
#5
  • Jun 25, 2005
  • #5
no i had it installed by a transmission shop. I drove it for about 250 miles before i drove it hard. its just very frustrating!!
 

PeteyAce

Member
Jul 2, 2004
346
0
17
Jun 25, 2005
#6
  • Jun 25, 2005
  • #6
i would check the d/s bolts, mines i was able to practically screw of by my hand because they werent on, now they are locktited on and no vibration except for the norm.
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jun 25, 2005
#7
  • Jun 25, 2005
  • #7
You may also want to crawl up under the car and check U-joints. Diiscovering that one or both is bad after pulling it all apart and putting it back together is not uncommon at all.
 

Numbles

Active Member
Dec 10, 2003
998
0
36
Chicago, IL
Jun 25, 2005
#8
  • Jun 25, 2005
  • #8
How is the car vibrating. Is it rpm related or mph related. That will help narrow whats wrong.
 
R

RATM

New Member
May 19, 2005
35
0
0
33467
Jun 26, 2005
#9
  • Jun 26, 2005
  • #9
The car is vibrating when I "get on it" so i would imagine that its RPM related, but only under moderate to hard acceleration.
 
You must log in or register to reply here.

Similar threads

S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
649
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
192
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
257
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
J
Bad Vibration
  • jefffletch47
  • Feb 12, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
7
Views
269
1996 - 2004 SN95 Mustang -General/Talk- Jun 2, 2026
dgrinnan
D
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
530
SN95 V6 Mustang Tech Tuesday at 2:38 PM
joeybuddy96
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?