clutch safety switch

S

silver87

New Member

Jul 4, 2004

115

0

0

Northern California

Oct 13, 2008

#1

• Oct 13, 2008

• #1

I have a 1988 mustang gt 5.0. When I have the css plunger depressed as if the clutch pedal were at the floor the engine cranks over but there is no spark. When the plun ger is out as if the clutch pedal were not depressed and i arch the starter solenoid I have spark. Right now the switch is not on the pedal. Does it have to be on the pedal for spark or is the switch bad? Can anyone help?
thanks

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Oct 13, 2008

#2

• Oct 13, 2008

• #2

The only difference would be the arcing (if across the big lugs) helping a connection on the solenoid itself, or possibly an issue in the start signal going to the TFI module.

See the "Start signal in" terminal in this diagram

Good luck.

 

S

silver87

New Member

Jul 4, 2004

115

0

0

Northern California

Oct 13, 2008

#3

• Oct 13, 2008

• #3

I forgot to mention it is a carb car now

 

HISSIN50

"How long does it take to get help in here?

15 Year Member

Nov 29, 1999

31,179

33

129

Oct 13, 2008

#4

• Oct 13, 2008

• #4

If the ignition was modified during your conversion, you'll have to go over your wiring. I could only guess what ignition configuration you use now or how it was wired up.

Good luck and bump for you.