Cobra blower/lighting manifold on 02' GT?

BGMustang said:

Okay, lets start with some background info, I work a ford dealership and have over time came up with these parts, 03' Cobra stock supercharger, Lighting intake manifold and lighting injectors. My question is I've heard of people putting f-150 intake mani. on Mustangs so what I'm wondering is could I use the intake/supercharger on my mustang? Or is there any lower intake manifold that I could use so that the blower would work on my car?

Finally I have a Linc. Town car 4.6 motor and was wondering if the intake/TB is an upgrade for my car, I mostly wondering about this because of the fact that it's alum. so I was thinking it would be stronger.

Any help would be great.
Thanks

Click to expand...

A lot of nice parts. Unfortunately for you, none of them will work with your car without a lot of other expensive parts. There are in fact a few supercharger kits that utilize the M112, such as the unit used on the Cobra/Lightning’s, unfortunately, the inlets are totally different and not interchangeable. Not to mention the lower manifold is completely different. As others have stated, your best bet would be to sell everything on Ebay and start over with SOHC specific parts.

As far as your Lincoln intake goes....it's a definite downgrade from your Mustang version. You didn't state what year it is, but if memory serves, your Lincoln has a forward facing intake and throttle body, much like the early 4.6L MN12 T-Bird/Cougar. If this is the case, it's quite restrictive in comparison to the plastic/aluminum version.