Watch for massive oil consumption, if your car starts burning major oil then youll need the larger baffle from FRPP. Also your dizzy might not be on the correct tooth, there is a thread that tells you how to correct this.
dizzy has nothing to do with the intake? I installed one on a 5.0 MN12 Cougar (same engine as the SN95)... But the engine would not run properly, I had a cylinder that would not work as if an injector wasn't working. Later I found out that I should have blocked off the EGR passages since the Cougar used the external EGR passage. If I would have installed it on a fox Mustang it would have worked at least that's all I can come up with. I installed the stock intake on the Cougar and the engine ran fine.
The problem I saw with my intake is the labels were on crooked, the casting was kind of fudged at the intake/head. I wouldn't get another one because of the EGR spacer being cast with the upper intake.